Search the Community

To all adventurous parents, Don't try this at our Mandai Zoo [sweatdrop] Check out the video embedded in the website. From STOMP: http://singaporeseen.stomp.com.sg/stomp/sg...o_eat_baby.html Posted on 17 May 2012 Lion desperately tries to eat baby -- from behind a glass wall STOMPer Fangsyou is amused with this lioness trying to attack a baby at a zoo. The lioness was pawing desperately at the baby and trying to bite its head, but was obstructed by the glass. The STOMPer is happy that humans are safe from attacks by wild animals. Said the STOMPer: "I saw this crazy video of a lion trying to chomp off a baby's head. "Luckily this is at a zoo and there's a sheet of glass separating the baby from the animal. "All hell will break lose when an animal like this escapes from the zoo. "We are so fortunate to live in a world without predators hunting us!"

Hi all Can some kind soul point me to a link or drop me a contact? I need a auto car instructor Also, if a student has registered in Woodlands, the driving test must be taken there too? Can't take it at, say, Ubi?

Hi all, i have a headache on my car, hope to get some help or advise Brought this Lancer EX 1.5 car a while ago, drive around and feel have vibration (personally dont like vibrations) rating the vibration density as 35/100 so butt itchy go check my engine mount at a amk autopoint work shop then workshop claims that 3 mount is broken - 100k car 3 years old. Went JB Stockist they only have inspira 1.8L NON ORIGINAL engine mount so brought to try ~ 130sgd, went back to the autopoint workshop he installed then found that 3 matches but 1 dont so lan lan have to ask him to order that 1 piece which he claims to be original to fit in. At night collect car feel than vibration got worse density 90/100 paid $250 for the labour and 1 original mount (so now 3 inspira 1 original) Drive for a day really bei ta han, go back to him then he suggest non original mount have such problem so i said ok then change the other 3 mount to original also then, at night collect paid another $380 for the 3 original mounts and labour (all 4 original) Tested the car, vibration reduced drastically density 5/100, so drove off 1st day - perfect 5/100 2nd day - perfect 5/100 3rd day - vib starts to increase density 20/100 4th day - 40/100 5th day - 50/100 1 week later till now - 75/100 went back to autopoint he said all is original liao also cant figure out what is wrong, i asked him to check screw tightening, he refix 3 easier enigine mount vibration become slightly better 70/100 but still vibrating a lot, asked him why 1st 2 days ok then after that become worse and worse he say might be what sensor here and there but i dont make sense when it works perfect for 2 days and before i change mount the vibration also much lesser than now, change and become worse. then he say put car and wait which i didnt as i highly doubt his efficency Now after 1 more week vibration becomes 80/100 le, then in D density is 80/100, in R density is 90/100 in N density is around 70/100. Thinking of going to stockist personally to change the engine mount to all original again what do you think? Please help i already wasted $720 for this problem that usually people spend $600 on. and new original mount is gonna waste me $600 again

Hi people I am kind of new to car audio and have faced several problems and felt that my money spent on my system is not up to standard... I am currently driving a 2006 Volvo s40 and the HU cannot be changed... thus I have to use a hi-low adapter tap from the original Volvo speaker cable to convert to RCA for my amp... I have installed the following components and how it is being run to my speakers. 1 Nakamichi PA-2004 four channel amp bridge to two channel for my front speaker which is Boston acoustic pro 60 component 1 Nakamichi PA-2002 two channel amp for my rear speaker which is Nakamichi sp-s6500 component 1 Nakamichi PA-2004 four channel amp bridge to two channels for my two Nakamichi 10" sp-w1000d subwoofer. Currently I am facing two problems... 1. My front imaging is lost from the original Volvo speaker... now my pro60 sound very separated and no frontal image. 2. No matter how I tune the phase for my woofer on the amp I still can hear the woofer is clearly coming from the back... again no front imaging of the bass... All component speaker is being installed in the factory location of my volvo which front and rear originally was componet... My installer tells me I need to get a pre-amp (either an active x-over or an equalizer) which I have yet gotten... I would like to hear some expert opinion before purchasing anymore equipment as I have already over spend on my equipment listed here... I was thinking if it was the hi-low adapter being used by my installer is not a good quality one and changing the adapter will improve the sound staging... Would really appreciate all you brothers at the forum's help here...