Features

• TwinDSP Power – two extremely powerful “fixed point” Audio DSPs with 64 Bit resolution and 2.4 billion MAC operations per second
• State-of-the-art 32 Bit AD and DA signal converters from AKM
• Virtual Channel Processing (VCP) allows even more flexible configuration for highly complex sound systems
• ACO – Advanced 32 Bit CoProcessor platform for numerous new system and DSP features like:
  • ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
  • SFX (DSP Sound Effects) – Augmented Bass Processing, StageXpander, RealCenter & Co.
  • 10 internal memory locations for sound setups
• HELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth Audio Streaming, High Resolution Audio Streaming via USB etc.
• Smart 8-channel highlevel input with ADEP.3 circuit
• Start-Stop capability down to 6V supply voltage
• “Ground lift” switch to avoid ground loops
• Control input for connecting remote controls and accessories
• Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
• Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
• Inputs: 8 x RCA/Cinch, 8 x Highlevel, 1 x optical SPDIF and 1 x coaxial SPDIF
• Outputs: 12 x RCA/Cinch with max. 8 Volts output voltage

Note: The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.

DSP Features​​​​​​​

• RealCenter
  The “RealCenter” feature is an algorithm, developed by Audiotec Fischer, that emphasizes the music information which is present in both the left and right front channel to create an unique center signal. In contrast to common procedures, in which only the channels are summed up, the intensity of the center signal is also dynamically controlled by the stereophonic informational content of the left and right channel.
  Sounds complicated but this effect is astonishing: That means if solely the left or right channel delivers an audio signal, the center channel will not reproduce a signal. In the case of common algorithms, the volume level of the center channel is only reduced by 6 dB (= half volume level). Audiotec Fischer’s “RealCenter” allows a unique, broadened sound staging for both driver and co-driver at the same time! Therefore, the disadvantages of a conventional center channel, such as an intrusive, small sound stage, are things of the past.
• Augmented Bass Processing
  Audiotec Fischer’s proprietary “Augmented Bass Processing”, consisting of the two revolutionary sound features “Dynamic Bass Enhancement” and “SubXpander”, has been especially developed to dramatically improve the bass reproduction of subwoofers.
  The “Dynamic Bass Enhancement” ingeniously combines maximum deep bass and highest sound pressure – regardless of the music style or the tone controls in the head unit. Depending on the input signal, the “Dynamic Bass Enhancement” gains the lower frequency range and varies the cut-off frequency of the subsonic filter. The result is a significantly more powerful and deeper bass response at low and medium volume levels without the risk of overloading the subwoofer neither mechanically nor electrically at high volume levels. It is simply fascinating which bass performance is suddenly possible.
  If you want an even lower and “darker” bass reproduction, the “SubXpander” can be additionally activated. Therefore, subharmonic tones are added to the fundamental tones in the frequency range between 50 and 100 Hz.
• StageXpander
  Depending on the speaker arrangement in the vehicle, a more or less wide stereo sound stage can be created on the front seats. A center speaker may limit the spatial reproduction of the music additionally. This is where Audiotec Fischer’s new “StageXpander” comes into play – a sound feature which seems to break the acoustic limitations and thus allows to create a way broader stereo base without negatively affecting the precision of the localization of voices or instruments!
  The effect can be adjusted according to your personal preferences in four steps.
• ClarityXpander
  You are looking for more transparency and substance in the treble reproduction? With the “ClarityXpander” Audiotec Fischer is now offering the right tool. Properly adjusted (and therefore selectable in three steps) the feature adds additional harmonics in the upper frequency range – this is especially useful if the original speakers lack some brilliance in the treble response. The extra treble-kick is not only available for the two front channels but also separately adjustable for the center channel. Even better – the center channel allows to activate an automatic and dynamic control so that music with “loads” of treble doesn’t fatigue your hearing.

Technical Data

• Inputs:
  8 x RCA / Cinch
  8 x Highlevel speaker input
  1 x Optical SPDIF (12 - 96 kHz)
  1 x Coax SPDIF (12 - 192 kHz)
  1 x Remote In
• Input sensitivity:
  RCA / Cinch 1 - 8 Volts
  Highlevel 4 - 32 Volts
• Outputs:    
  12 x RCA / Cinch
  1 x Remote Out
• Output voltage: 8 Volts
• Frequency response: 10 Hz - 44,000 Hz
• DSP resolution: 64 Bit
• DSP power: 2 x 295 MHz (2.4 billion MAC operations/second)
• Sampling rate: 96 kHz
• DSP type: 2 x Audio signal processor
• Signal converters:
  A/D: Asahi Kasei 32 Bit
  D/A: Asahi Kasei 32 Bit
• Signal-to-noise ratio digital input: 117 dB (A-weighted)
• Signal-to-noise ratio analog input: 111 dB (A-weighted)
• Total harmonic distortion (THD+N) digital input: < 0.0004 %
• Total harmonic distortion (THD+N) analog input: < 0.001 %
• IM distortion (IMD) digital input: < 0.002 %
• IM distortion (IMD) analog input: < 0.004 %
• Crosstalk: > 90 dB
• Operating voltage: 9.6 - 18 Volts (max. 5 sec. down to 6 Volts)
• Power rating: DC 12 V ⎓ 1.2 A max.
• Current draw: 650 mA
• Max. remote output current: 500 mA
• Additional features: HEC slot, Ground lift switch, Control Input, 32 Bit CoProcessor, ADEP.3 circuit, Auto Remote switch
• Dimensions (H x W x D): 40 x 177 x 170 mm / 1.58 x 6.97 x 6.69“