Enjoy BlackVue's parking mode with Power Magic Pro. It will automatically cuts off the power to BlackVue when voltage of car battery drops below the threshold voltage setting or the timer had lapsed (whichever comes first). The design allows the unit to be installed neatly, normally below the dashboard and without exposing any of the cable. The switch allows you to enable or disable the parking mode with ease. 

Power your BlackVue in Parking mode

• ​Power solutions for BlackVue with Power Magic Pro or Cellink B Battery
• Rest easy, knowing that your car is being monitored while you are away
• BlackVue dashcams automatically switches to Parking Mode to monitor your parked vehicle, but only writes to the memory card when motion or impact detected

Using Car Battery Power

​Power Magic Pro requires power from car battery and connection is tapped from fuse box / fuse panel. All connection is protected with safety fuse. 

You need to use Cellink B battery option instead for parking mode if

​1) Power connection is only permits from cigar jack socket and not from fuse panel

2) Prefer not to use power from car battery

Neat Installation

Typically, the Power Magic Pro is located below the dashboard, accessible by user to perform the settings or control the parking mode.

Full control

​Switches for easy control:

• Parking mode
• Voltage cut-off 
• Timer cut-off

Parking Mode Switch

​

• Parking Mode Switch ON: Power Magic Pro supplies your BlackVue with power even if the ignition of the vehicle is turned off, until it reaches voltage cut-off or timeout value

   

• Parking Mode Switch OFF: Power Magic Pro supplies power to your dashcam only when vehicle ignition is on

Low Voltage Cut-off Settings

​

When vehicle’s ignition is off, Power Magic Pro checks your vehicle’s battery voltage while powering your BlackVue. If power drops below the set cut-off level, Power Magic Pro automatically cuts power to the dashcam, thus saving your vehicle’s battery life.

Note: Setting of 12.5V or 23.2V (heavy vehicle) is recommended for safer voltage cut-off as to protect vehicle's battery performance and life.

Timer Cut-off Settings

If the timer is configured, the product supplies power to the vehicle driver recorder until the configured time has lapsed and then cuts off the power to BlackVue. In addition, the timer function only works when the engine is switched OFF. 

Note: Even if configured time has not elapsed, the power is cut if the voltage drops below the configured voltage.

Specifications

• Rated Ouput Voltage : DC12~24V
• Output Current : Rated current 1A, Max 2A / Below 200A
• Output Voltage Cut-Off (on the basis of the input) : 11.8~12V (±0.1V) | 22.8~23.2V (±0.2V)
• Output Voltage Restoration (on the basis of the input) : 12V~12.2V (±0.1V) | 23.0~23.4V (±0.2V)
• Output Voltage Cut-Off TImer Function : 6 hours~Infinity