MUSWAY M4+ 

Specifications:

• OUTPUT POWER (RMS) at 13.8 VDC, 1% THD: 4CH at 4 Ohms:100 W x 4 4CH at 2 Ohms:135 W x4 2CH - (Bridge 1/2; 3/4) at 4 Ohms: 270 W x 2
• Distortion - THD (1 kHz at 4 Ohms, 90% Power) :0.05%
• Bandwidth (-3 dB, 2 V RMS, 4Ohms): 15Hz-22KHz
• S/N ratio at A weighted, 1 V, Max. Power: 95dB A
• Damping factor at 1 kHz, 2 V RMS, 4 Ohms: >70
• Input sensitivity: 6V-18V RMS(High-level) 2V-6V RMS(Low-level)
• Input impedance: 13 0(High-level) 47K0(Low-level)
• LOAD IMPEDANCE (MIN): 4CH: 20 2CH - Bridge (1-2) (3-4) :40
• Operating Voltage: DC 8 -15V
• Dimensions (mm) : 220 (L) x150 (W) x44 (H)
• Net Weight :1.6KG

MUSWAY FOUR.100

4-CHANNEL CLASS D AMPLIFIER

The new amplifiers of the MX series are ideally suited not only to enter into optically ingenious combinations with the MUSWAY DSP amps M4+, M6 or D8. Of course, they are also perfect for forming a high-end team with the TUNE12, DSP68PRO or DSP68 stand-alone processor. With the MX models it is therefore possible to create powerful 7, 8 or even 12-channel combinations. The elegantly designed amps convey their qualities as soon as they are touched: No rattling sheet metal, heat sinks and end panels made of brushed aluminum and a flush MUSWAY logo on top. The amplifiers have everything on board that a modern sound system needs: EPS, auto turn-on, high and low level inputs and much more. The ingeniously switchable crossovers in the multi-channel amplifiers offer every imaginable configuration - whether fully active, semi active or passive operation, everything is possible.

Specifications:

• 4 x 120/200 Watts RMS @ 4/2 Ohms
• 2 x 400 Watts RMS @ 4 Ohms bridged
• Highpass Filter 50 - 5000 Hz (CH1/2)
• Highpass Filter 10 - 500 Hz (CH3/4)
• Lowpass Filter 50 - 5000 Hz (CH3/4)
• Bass Boost 0 - 12 dB (CH3/4)
• Bandpass Function (CH3/4)
• CH3/4 > CH1/2 Copy Function
• Input Mode Switch CH2/CH4
• RCA Inputs, RCA Outputs
• High Level Inputs with EPS
• Auto Turn On Function
• Bass Remote Controller
• Dimensions: 150 x 45 x 220 mm

GROUND ZERO GZHK 165

165 mm / 6.5″ high power midwoofer

180 Watts max

6.5″ high power midwoofer with non-pressed paper cone

• 6.5″ high power midwoofer
• 38 mm / 1.5″ CCA voice coil
• Non-pressed paper cone
• Ferrite motor
• GZ design aluminum cast basket
• High power capable 4 ohms version
• Linearized motor
• Incl. GZ design protection grill
• 1 pair / package

GROUND ZERO GZUM 55SQ

55 mm SQ midrange speaker

150 Watts max

2.17″ midrange speaker with silk dome

• 55 mm / 2.17″ SQ dome midrange speaker
• 55 mm / 2.17″ copper voice coil
• Coated silk dome
• Neodymium motor
• GZ design housing
• Incl. hexagion protection grill
• Connection wires
• 1 pair / package

GROUND ZERO GZHT 25S

25 mm / 1″ silk dome tweeter

110 Watts max

1″ high performance silk dome tweeter with coupled chamber

• 25 mm / 1″ silk dome tweeter
• Flush mount housing
• Coated silk dome
• Neodymium motor
• Connection wires
• 1 pair / package

GROUND ZERO GZIB 250XBR

25 cm / 10″ vented subwoofer loaded enclosure

250 Watts RMS

Passive vented enclosure including 10″ IRIDIUM subwoofer with EFP front bass channel and angled rear wall

• 10″ vented subwoofer loaded enclosure
• Subwoofer GZIW 250X-II
• Front vented
• Wooden enclosure
• Push terminal