Ad information
The P 3M cone midrange speaker is the perfect complement for every fully active driven 2-way speaker system. Its lightweight glassfiber-paper compound cone guarantees excellent impulse response and minimum sound discoloration, whereas the highly efficient neodymium magnet system provides for a linear drive and minimum distortion. Additionally, the flow-optimized basket not only prevents rear reflections, but also ensures compression-free sound reproduction thanks to optimum voice coil cooling. The P 3M develops its full tonal potential in a sealed, dampened enclosure.
Features
3” / 75 mm cone midrange speaker with novel glassfiber-paper compound cone for maximum stiffness combined with lowest moving mass and perfect inner damping
Highly efficient, compact neodymium magnet system for linear drive and minimum distortion
Low-resonant basket made from glassfiber reinforced plastic with optimized voice coil cooling for high power handling
Grille included
Specifications
Power RMS / max. - P - 75 / 150 Watts (highpass > 400 Hz at 24 dB/Oct.)
Impedance - Z - 4 Ω
DC resistance - Re - 3.3 Ω
Frequency response - 400 Hz - 5,000 Hz
Resonance frequency - Fs - 130 Hz
Mechanical Q factor - Qms - 4.72
Electrical Q factor - Qes - 0.50
Total Q factor - Qts - 0.45
Compliance - Cms - 415 µm/N
Equivalent air volume - Vas - 0.54 L
Force factor - B*I - 4.4 Tm
Efficiency 1 W / 1 m - SPL - 86 dB
Cone area - Sd - 30 cm²
Moving mass - Mms - 3.7 g
Cone material - Glassfiber-paper compound cone
Mechanical resistance - Rms - 0.63 kg/s
Voice coil diameter - ø - 25 mm
Voice coil winding height - 8 mm
Max. linear excursion - Xmax - +/- 2 mm
Outer diameter - ø - 90 mm / 3.54"
Installation diameter - ø - 73 mm / 2.87"
Installation depth - 37 mm / 1.46"
Recommended enclosure volumes
Sealed box with minimum 200 ml net volume
Net volumes - Recommended DSP / amplifier settings
0.2 liter (System resonance: 230 Hz) -
Crossover frequency: 500 Hz
Min. filter slope: 12 dB/Oct.
0.4 liter (System resonance: 190 Hz) -
Crossover frequency: 450 Hz
Min. filter slope: 18 dB/Oct.
0.6 liter (System resonance: 170 Hz) -
Crossover frequency: 400 Hz
Min. filter slope: 24 dB/Oct.
Note: The enclosure should always be filled with appropriate damping material.
- Audio system in car entertainment
- Car air cinditioning servicing / maintenance and repair
- Accessories retail
- Security system
- Car mats
- Solar films and tinting
- Car battery
- Car recorder
- Car power enhancement
Website: http://www.designerice.sg/
Facebook: https://www.facebook.com/DesignerICEEnterprise
Ad information
The P 3M cone midrange speaker is the perfect complement for every fully active driven 2-way speaker system. Its lightweight glassfiber-paper compound cone guarantees excellent impulse response and minimum sound discoloration, whereas the highly efficient neodymium magnet system provides for a linear drive and minimum distortion. Additionally, the flow-optimized basket not only prevents rear reflections, but also ensures compression-free sound reproduction thanks to optimum voice coil cooling. The P 3M develops its full tonal potential in a sealed, dampened enclosure.
Features
3” / 75 mm cone midrange speaker with novel glassfiber-paper compound cone for maximum stiffness combined with lowest moving mass and perfect inner damping
Highly efficient, compact neodymium magnet system for linear drive and minimum distortion
Low-resonant basket made from glassfiber reinforced plastic with optimized voice coil cooling for high power handling
Grille included
Specifications
Power RMS / max. - P - 75 / 150 Watts (highpass > 400 Hz at 24 dB/Oct.)
Impedance - Z - 4 Ω
DC resistance - Re - 3.3 Ω
Frequency response - 400 Hz - 5,000 Hz
Resonance frequency - Fs - 130 Hz
Mechanical Q factor - Qms - 4.72
Electrical Q factor - Qes - 0.50
Total Q factor - Qts - 0.45
Compliance - Cms - 415 µm/N
Equivalent air volume - Vas - 0.54 L
Force factor - B*I - 4.4 Tm
Efficiency 1 W / 1 m - SPL - 86 dB
Cone area - Sd - 30 cm²
Moving mass - Mms - 3.7 g
Cone material - Glassfiber-paper compound cone
Mechanical resistance - Rms - 0.63 kg/s
Voice coil diameter - ø - 25 mm
Voice coil winding height - 8 mm
Max. linear excursion - Xmax - +/- 2 mm
Outer diameter - ø - 90 mm / 3.54"
Installation diameter - ø - 73 mm / 2.87"
Installation depth - 37 mm / 1.46"
Recommended enclosure volumes
Sealed box with minimum 200 ml net volume
Net volumes - Recommended DSP / amplifier settings
0.2 liter (System resonance: 230 Hz) -
Crossover frequency: 500 Hz
Min. filter slope: 12 dB/Oct.
0.4 liter (System resonance: 190 Hz) -
Crossover frequency: 450 Hz
Min. filter slope: 18 dB/Oct.
0.6 liter (System resonance: 170 Hz) -
Crossover frequency: 400 Hz
Min. filter slope: 24 dB/Oct.
Note: The enclosure should always be filled with appropriate damping material.
Merchant information
More items from this seller
Email Enquiry
* indicates compulsory field.