SOLD
Quartorigo Overture Component Speakers (With Helix M Four DSP & Pioneer TS-WX130DA Active Subwoofer)
-
Condition
Brand New
Category
Suitable For
All Models
Posted on: 04 Sep 2024 | Updated on : 12 Sep 2024
Merchant information
| 160 Sin Ming Drive #08-02 Sin Ming AutoCity S(575722) | ||
| 9.30am - 7pm (Mon - Sun) | ||
92325621 
62661719
|
Ad information
@ ONLY $1988 with installation & 1 Year Warranty (U.P. $2488)
Quartorigo Overture
Midwoofer - 6.5'' / 165 mm
- Normal Impedance: 4Ω
- Power RMS: 50W
- Voice Coil Ø: 25mm
- Sensivity: 90dB
- Frequency Response: 60Hz - 7.000Hz
Midrange - 3.5'' / 89 mm
- Normal Impedance: 4Ω
- Power RMS: 40W
- Voice Coil Ø: 20mm
- Sensivity: 90dB
- Frequency Response: 200Hz - 10.000Hz
Tweeter - 1'' / 25 mm
- Normal Impedance: 4Ω
- Power RMS (filtered 12dB 2500hz): 50W
- Voice Coil Ø: 25mm
- Sensivity: 90dB
- Frequency Response: 3.000Hz - 20.000Hz
Tweeter protection - 4,7 uF capacitor
Helix M Four DSP Specification
- Power RMS ≤ 1% THD+N
- @ 4 Ohms - 4 x 100 Watts
- @ 2 Ohms - 4 x 100 Watts
- bridged @ 4 Ohms - 2 x 200 Watts
- Max. output power per channel*
- Up to 135 Watts RMS @ 4 / 2 Ohms
- Amplifier technology
- Class D
- Inputs
- 6 x RCA / Cinch
- 6 x Highlevel speaker input
- 1 x Optical SPDIF (12 - 96 kHz)
- 1 x Remote In
- Input sensitivity
- RCA / Cinch 1 - 4 Volts
- Highlevel 5 - 20 Volts
- Input impedance RCA / Cinch
- 22 kOhms
- Input impedance highlevel
- 9 - 33 Ohms or 20 kOhms
- Outputs
- 4 x Speaker output
- 6 x RCA / Cinch
- 2 x Remote Out
- Output voltage RCA / Cinch
- 6 Volts RMS
- Frequency response
- 20 Hz - 22,000 Hz
- DSP resolution
- 64 Bit
- DSP power
- 295 MHz (1.2 billion MAC operations/second)
- Sampling rate
- 48 kHz
- DSP type
- Audio signal processor
- Signal-to-noise ratio digital input
- 105 dB (A-weighted)
- Signal-to-noise ration analog input
- 102 dB (A-weighted)
- Distortion (THD)
- < 0.03 %
- Damping factor
- 100
- Operating voltage
- 10.5 - 16 Volts (max. 5 sec.down to 6 Volts)
- Idle current
- 1500 mA
- Max. remote output current
- 500 mA
- Fuse
- 2 x 30 A Maxi-fuse (APX)
- Additional features
- ADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control Input
TS-WX130DA
20cm (8”) Sealed Active Subwoofer
160W Max Power
Built-In Class-D Amplifier
Digital Bass Control
Woofer Size
- 20cm x 13cm
Max Music Power
- 160 W
Nominal Output Power
- 50 W
Frequency Response
- DEEP：20~200 Hz DYNAMIC：40~160 Hz
Sensitivity (1W/1m)
- DEEP：95 dB DYNAMIC：100 dB
High end does not mean high price. At SingTrade, we believe the best sounding system is not just because of the usage of expensive products, but also having the system properly designed. Only with proper design and integration, the system can be utilized to it's fullest potential.
With a range of audio products, coupled with a group of experts, we strive to provide the best system and performance that suits every individual's budget. This is how we define value.
Call us or visit our Facebook page to find out more!
Singtrade Car Audio & Accessories
160, Sin Ming Drive #08-02, Sin Ming AutoCity, S(575722)
TEL: 6266 1719
H/P: +65 92325621
WhatsApp: https://wa.me/message/2SHQ54IGWNLIB1
Facebook URL: https://www.facebook.com/SingTrade-Marketing-Services-1482040458683011/
Facebook URL: https://www.facebook.com/SingTrade-Marketing-Services-1482040458683011/
Ad information
@ ONLY $1988 with installation & 1 Year Warranty (U.P. $2488)
Quartorigo Overture
Midwoofer - 6.5'' / 165 mm
- Normal Impedance: 4Ω
- Power RMS: 50W
- Voice Coil Ø: 25mm
- Sensivity: 90dB
- Frequency Response: 60Hz - 7.000Hz
Midrange - 3.5'' / 89 mm
- Normal Impedance: 4Ω
- Power RMS: 40W
- Voice Coil Ø: 20mm
- Sensivity: 90dB
- Frequency Response: 200Hz - 10.000Hz
Tweeter - 1'' / 25 mm
- Normal Impedance: 4Ω
- Power RMS (filtered 12dB 2500hz): 50W
- Voice Coil Ø: 25mm
- Sensivity: 90dB
- Frequency Response: 3.000Hz - 20.000Hz
Tweeter protection - 4,7 uF capacitor
Helix M Four DSP Specification
- Power RMS ≤ 1% THD+N
- @ 4 Ohms - 4 x 100 Watts
- @ 2 Ohms - 4 x 100 Watts
- bridged @ 4 Ohms - 2 x 200 Watts
- Max. output power per channel*
- Up to 135 Watts RMS @ 4 / 2 Ohms
- Amplifier technology
- Class D
- Inputs
- 6 x RCA / Cinch
- 6 x Highlevel speaker input
- 1 x Optical SPDIF (12 - 96 kHz)
- 1 x Remote In
- Input sensitivity
- RCA / Cinch 1 - 4 Volts
- Highlevel 5 - 20 Volts
- Input impedance RCA / Cinch
- 22 kOhms
- Input impedance highlevel
- 9 - 33 Ohms or 20 kOhms
- Outputs
- 4 x Speaker output
- 6 x RCA / Cinch
- 2 x Remote Out
- Output voltage RCA / Cinch
- 6 Volts RMS
- Frequency response
- 20 Hz - 22,000 Hz
- DSP resolution
- 64 Bit
- DSP power
- 295 MHz (1.2 billion MAC operations/second)
- Sampling rate
- 48 kHz
- DSP type
- Audio signal processor
- Signal-to-noise ratio digital input
- 105 dB (A-weighted)
- Signal-to-noise ration analog input
- 102 dB (A-weighted)
- Distortion (THD)
- < 0.03 %
- Damping factor
- 100
- Operating voltage
- 10.5 - 16 Volts (max. 5 sec.down to 6 Volts)
- Idle current
- 1500 mA
- Max. remote output current
- 500 mA
- Fuse
- 2 x 30 A Maxi-fuse (APX)
- Additional features
- ADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control Input
TS-WX130DA
20cm (8”) Sealed Active Subwoofer
160W Max Power
Built-In Class-D Amplifier
Digital Bass Control
Woofer Size
- 20cm x 13cm
Max Music Power
- 160 W
Nominal Output Power
- 50 W
Frequency Response
- DEEP：20~200 Hz DYNAMIC：40~160 Hz
Sensitivity (1W/1m)
- DEEP：95 dB DYNAMIC：100 dB
Merchant information
Posted on: 04 Sep 2024 | Updated on : 12 Sep 2024
More items from this seller
Similar Items
Email Enquiry
This enquiry will be sent directly to the seller.
* indicates compulsory field.
* indicates compulsory field.