Jump to content

 
Mosconi Pico 6|8 DSP 6-Ch Amplifier (With Integrated 8-Ch DSP)
$1,488 Cash & Carry
Condition
Brand New
Suitable For
All Models
Posted on: 23 Oct 2024 | Updated on : 23 Oct 2024

Merchant information

160 Sin Ming Drive #07-16 Sin Ming AutoCity S(575722)
( 1 more outlet )
10am - 7.30pm (Mon - Sat) Closed on Sun & PHs
94576556
63776882

Ad information

Perfect OEM integration:

Powerful DSP amplifier optimized for factory radio use. Six analog inputs up to 30 V, flexible routing, 3 x input EQ and delay. With 4 x 50 Watts + 2 x 90 Watts ideal for active and semi-active systems, as well as classic front + rear + sub application. With two digital inputs (SP-Dif and BT+) and two processed line outs ready for the future.

Transducerless high-speed PWM power amplifiers:

High-efficiency PWM output stages with the fastest carrier frequency in the world today (> 2 MHz). The modulation is done without DAC directly from the 48 kHz TDM signal of the DSP, thus the noise floor goes to zero and THD+N ~ 0.02 % / 1 W.


INPUT:

  • 4 x analog inputs balanced (high-level) up to 30 V
  • 2 x analog inputs switchable high level / low level)
  • 1 x digital input SP-Dif optical (8 kHz - 96 kHz sampling rate)
  • 1 x bluetooth port with SP-Dif - TTL (8 kHz - 96 kHz, e.g. for Mos_BTS bluetooth streaming module)
  • Bluetooth extended digital audio port (BT+)
    (flexible 8 kHz - 384 kHz synchronous digital input for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS-LD4C BT streaming module or extended analog inputs)

DSP:

  • 912 MHz, 32-bit audio port, 64-bit core
  • Double precision 56 Bit filter calculation
  • 6144 SIMD instructions per sample at 48 kHz
    ASRCs from 1:8 up to 7.75:1 ratio and 139 dB DNR

CONTROL:

  • 1 x remote connector (analog, for RTC.2 roti remote control)
  • 1 x bluetooth control port (Connection MOS-BT3.0 (app control), RC-Can (CAN-Bus control), MOS_USB2.0 (programming dongle)
  • 1 x remote out, 1 x remote in, auto remote for high level connection
  • Connections with MOLEX plug contacts
  • Very small size with low heat generation, best suited for installation behind panels


OUTPUT POWER/OUTPUT SIDE:

  • Output power @ 4Ω: 4 x 50 Watts (channel 1 - 4) 3-Ohm stable (not bridgeable!)
  • Output power @ 4Ω: 2 x 90 Watts (channel 5 - 6) 2-Ohm stable / bridgeable
  • Output power @ 4Ω: 4 x 50 Watts + 1 x 240 Watts (bridged channel 5 + 6)
  • Line Out: 2 x 2 Vrms Line Out

SPECIFICATIONS:

  • Input voltage: 0,3 - 15 V
  • Overall efficiency: > 80 %
  • Auto-On (only High Level): Off - BTL
  • Dimensions: 150 x 133 x 46 mm
  • Weight: 800 Gramm
-----------------
Xtremez Audio Accessories, being a newly opened car audio centre, was established in 2012 to provide expert advice and professional installations while maintaining the cost-effectiveness for all out customer. Although we are relatively new in the industry, we have a team of knowledgeable audio specialists in the business.
 
Call us to find out more!
 

Ad information

Perfect OEM integration:

Powerful DSP amplifier optimized for factory radio use. Six analog inputs up to 30 V, flexible routing, 3 x input EQ and delay. With 4 x 50 Watts + 2 x 90 Watts ideal for active and semi-active systems, as well as classic front + rear + sub application. With two digital inputs (SP-Dif and BT+) and two processed line outs ready for the future.

Transducerless high-speed PWM power amplifiers:

High-efficiency PWM output stages with the fastest carrier frequency in the world today (> 2 MHz). The modulation is done without DAC directly from the 48 kHz TDM signal of the DSP, thus the noise floor goes to zero and THD+N ~ 0.02 % / 1 W.


INPUT:

  • 4 x analog inputs balanced (high-level) up to 30 V
  • 2 x analog inputs switchable high level / low level)
  • 1 x digital input SP-Dif optical (8 kHz - 96 kHz sampling rate)
  • 1 x bluetooth port with SP-Dif - TTL (8 kHz - 96 kHz, e.g. for Mos_BTS bluetooth streaming module)
  • Bluetooth extended digital audio port (BT+)
    (flexible 8 kHz - 384 kHz synchronous digital input for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS-LD4C BT streaming module or extended analog inputs)

DSP:

  • 912 MHz, 32-bit audio port, 64-bit core
  • Double precision 56 Bit filter calculation
  • 6144 SIMD instructions per sample at 48 kHz
    ASRCs from 1:8 up to 7.75:1 ratio and 139 dB DNR

CONTROL:

  • 1 x remote connector (analog, for RTC.2 roti remote control)
  • 1 x bluetooth control port (Connection MOS-BT3.0 (app control), RC-Can (CAN-Bus control), MOS_USB2.0 (programming dongle)
  • 1 x remote out, 1 x remote in, auto remote for high level connection
  • Connections with MOLEX plug contacts
  • Very small size with low heat generation, best suited for installation behind panels


OUTPUT POWER/OUTPUT SIDE:

  • Output power @ 4Ω: 4 x 50 Watts (channel 1 - 4) 3-Ohm stable (not bridgeable!)
  • Output power @ 4Ω: 2 x 90 Watts (channel 5 - 6) 2-Ohm stable / bridgeable
  • Output power @ 4Ω: 4 x 50 Watts + 1 x 240 Watts (bridged channel 5 + 6)
  • Line Out: 2 x 2 Vrms Line Out

SPECIFICATIONS:

  • Input voltage: 0,3 - 15 V
  • Overall efficiency: > 80 %
  • Auto-On (only High Level): Off - BTL
  • Dimensions: 150 x 133 x 46 mm
  • Weight: 800 Gramm

Merchant information

160 Sin Ming Drive #07-16Sin Ming AutoCity S(575722)
53 Ubi Avenue 1 #01-06Paya Ubi Industrial Park S(408934)
10am - 7.30pm (Mon - Sat) Closed on Sun & PHs
94576556 / 63776882
Posted on: 23 Oct 2024 | Updated on : 23 Oct 2024

Similar Items

Related Searches : Multi-channel Amplifier

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...