Jump to content

 
Pioneer GM-D8704 4-Channel Amplifier
$429 Cash & Carry
Condition
Brand New
Suitable For
All Models
Posted on: 22 Dec 2024 | Updated on : 22 Dec 2024

Merchant information

2 Jalan Kilang Barat #04-02 S(159346)
9am - 5.30pm (Mon - Fri)
63787777

Ad information

 

Amplify your audio experience with new Class-D Amplifier
An amplifier shouldn’t take up too much space, especially in your car. This Class-D amps might just be what you’re looking for. It combines a 1-Ohm stable circuit, installation flexibility and a superior high-power output.

Features:

High Quality Sound Parts and Tuning
Audio film capacitors and low-impedance coil are used for the output LC filter to ensure excellent sound quality. Audio tuning based on the reproduction of the original audio source allows everyone to experience the difference in sound quality when connected.

High-capacity Audio Power Source Capacitor
Pioneer's original high-capacity audio power source capacitor contributes to higher sound quality and stable power allotment even at high output.

Variable HPF & LPF
Adjust LPF & HPF (40-500 Hz).

Turn Up The Bass
The GM-D8704 also features a Bass Boost Remote for optimal bass level adjustment according to listening preferences and music characteristics.

Automatic Signal Sensing and Turn-On
Pioneer's Class-D amplifier automatically selects an input signal mode between the RCA level and the speaker level detecting an input signal. In the case of speaker line input, the amplifier will automatically switch on when the receiver is turned on.

Protection Control System
Designed to bolster reliability, this system reduces the risk of damage due to an overly high input power, by sensing the internal temperature and moderating the signal on-the-fly.


Specifications:

  • Number of Channels: 4 / 3 / 2
  • Max. Wattage (4 Ω): 200 W x 4
  • Max. Wattage (2 Ω): 300 W x 4
  • Max. Wattage (1 Ω): 250 W x 4
  • Max. Wattage Bridged (4 Ω): 600 W x 2
  • Wattage RMS (4 Ω <= 1%THD+N): 100 W x 4
  • Wattage RMS (2 Ω <= 1%THD+N): 150 W x 4
  • Wattage RMS (1 Ω <= 1%THD+N): 125 W x 4
  • Wattage RMS Bridged (4 Ω): 300 W x 2
  • Frequency Response: 10 Hz to 50 kHz
  • Total Harmonic Distortion (1kHz, 4 Ω): < 0.05%
  • Signal-to-Noise Ratio (IHF-A Weighted): > 95 dB
  • Dimensions (W x H x D): 265 mm x 60 mm x 200 mm

Ad information

 

Amplify your audio experience with new Class-D Amplifier
An amplifier shouldn’t take up too much space, especially in your car. This Class-D amps might just be what you’re looking for. It combines a 1-Ohm stable circuit, installation flexibility and a superior high-power output.

Features:

High Quality Sound Parts and Tuning
Audio film capacitors and low-impedance coil are used for the output LC filter to ensure excellent sound quality. Audio tuning based on the reproduction of the original audio source allows everyone to experience the difference in sound quality when connected.

High-capacity Audio Power Source Capacitor
Pioneer's original high-capacity audio power source capacitor contributes to higher sound quality and stable power allotment even at high output.

Variable HPF & LPF
Adjust LPF & HPF (40-500 Hz).

Turn Up The Bass
The GM-D8704 also features a Bass Boost Remote for optimal bass level adjustment according to listening preferences and music characteristics.

Automatic Signal Sensing and Turn-On
Pioneer's Class-D amplifier automatically selects an input signal mode between the RCA level and the speaker level detecting an input signal. In the case of speaker line input, the amplifier will automatically switch on when the receiver is turned on.

Protection Control System
Designed to bolster reliability, this system reduces the risk of damage due to an overly high input power, by sensing the internal temperature and moderating the signal on-the-fly.


Specifications:

  • Number of Channels: 4 / 3 / 2
  • Max. Wattage (4 Ω): 200 W x 4
  • Max. Wattage (2 Ω): 300 W x 4
  • Max. Wattage (1 Ω): 250 W x 4
  • Max. Wattage Bridged (4 Ω): 600 W x 2
  • Wattage RMS (4 Ω <= 1%THD+N): 100 W x 4
  • Wattage RMS (2 Ω <= 1%THD+N): 150 W x 4
  • Wattage RMS (1 Ω <= 1%THD+N): 125 W x 4
  • Wattage RMS Bridged (4 Ω): 300 W x 2
  • Frequency Response: 10 Hz to 50 kHz
  • Total Harmonic Distortion (1kHz, 4 Ω): < 0.05%
  • Signal-to-Noise Ratio (IHF-A Weighted): > 95 dB
  • Dimensions (W x H x D): 265 mm x 60 mm x 200 mm

Merchant information

2 Jalan Kilang Barat #04-02 S(159346)
9am - 5.30pm (Mon - Fri)
63787777
Posted on: 22 Dec 2024 | Updated on : 22 Dec 2024

Features & specs

13278_1.jpg?1553075198

Amplify your audio experience with new Class-D Amplifier

An amplifier shouldn’t take up too much space, especially in your car. This Class-D amps might just be what you’re looking for. It combines a 1-Ohm stable circuit, installation flexibility and a superior high-power output.

 

Features:

  • High Quality Sound Parts and Tuning

     

    13278_2.jpg?1553075198

     

    Audio film capacitors and low-impedance coil are used for the output LC filter to ensure excellent sound quality. Audio tuning based on the reproduction of the original audio source allows everyone to experience the difference in sound quality when connected.

     

  • High-capacity Audio Power Source Capacitor

     

    13278_3.jpg?1553075198

     

    Pioneer's original high-capacity audio power source capacitor contributes to higher sound quality and stable power allotment even at high output.

     

  • Variable HPF & LPF

     

    13278_4.jpg?1553075198

     

    Adjust LPF & HPF (40-500 Hz).

     

  • Turn Up The Bass

     

    13278_5.jpg?1553075198

     

    The GM-D8704 also features a Bass Boost Remote for optimal bass level adjustment according to listening preferences and music characteristics.

     

  • Automatic Signal Sensing and Turn-On

     

    13278_6.jpg?1553075198

     

    Pioneer's Class-D amplifier automatically selects an input signal mode between the RCA level and the speaker level detecting an input signal. In the case of speaker line input, the amplifier will automatically switch on when the receiver is turned on.

     

  • Protection Control System

     

    13278_7.jpg?1553075198

     

    Designed to bolster reliability, this system reduces the risk of damage due to an overly high input power, by sensing the internal temperature and moderating the signal on-the-fly.

Specifications:

  • Number of Channels: 4 / 3 / 2
  • Max. Wattage (4 Ω): 200 W x 4
  • Max. Wattage (2 Ω): 300 W x 4
  • Max. Wattage (1 Ω): 250 W x 4
  • Max. Wattage Bridged (4 Ω): 600 W x 2
  • Wattage RMS (4 Ω <= 1%THD+N): 100 W x 4
  • Wattage RMS (2 Ω <= 1%THD+N): 150 W x 4
  • Wattage RMS (1 Ω <= 1%THD+N): 125 W x 4
  • Wattage RMS Bridged (4 Ω): 300 W x 2
  • Frequency Response: 10 Hz to 50 kHz
  • Total Harmonic Distortion (1kHz, 4 Ω): < 0.05%
  • Signal-to-Noise Ratio (IHF-A Weighted): > 95 dB
  • Dimensions (W x H x D): 265 mm x 60 mm x 200 mm
Consumer Reviews
N/A
There is no consumer review available. Be the first to Rate it !

Similar Items

Related Searches : Multi-channel Amplifier

Email Enquiry

This enquiry will be sent directly to the seller.
* indicates compulsory field.
×
×
  • Create New...