Ad information
Features
“Ultra HD Class D” concept which combines the high-end sound quality of Class AB technology with the benefits of Class D amplifiers
Two speaker outputs with 490 Watts RMS each at 2 Ohms
Digital, optical signal input in SPDIF format including SPDIF Direct In switch for routing the digital input signal directly to the power stage
BurrBrown DA signal converter of the latest generation with a resolution of 32 Bit
Integrated, active crossover with highpass, lowpass, bandpass and configurable bass boost
Smart highlevel input with ADEP circuit
Cable remote control for volume adjustment
Compact design with low heat dissipation thanks to extraordinary efficiency
Technical data
Output power RMS / max.:
- @ 4 Ohms: 2 x 280 / 560 Watts
- @ 2 Ohms: 2 x 490 / 980 Watts
- @ 1 Ohm: -
- bridged @ 4 Ohms: -
- bridged @ 2 Ohms: -
Max. output power per channel*: Up to 600 Watts RMS @ 2 Ohms
Amplifier technology: Ultra HD Class D
Inputs:
2 x RCA / Cinch
2 x Highlevel speaker input
1 x Optical SPDIF (28 - 96 kHz)
1 x Remote In
1 x Remote control input
Input sensitivity:
RCA / Cinch 2 - 8 Volts
Highlevel 5 - 20 Volts
Input impedance RCA / Cinch: 10 kOhms
Input impedance highlevel: 13 Ohms
Outputs: 2 x Speaker output
Output voltage RCA / Cinch: -
Signal converter for digital input: BurrBrown 32 Bit DA converter
Frequency response: 10 Hz - 40,000 Hz
Bass boost: 0 - 9 dB / 40 Hz - 120 Hz
Highpass: 15 Hz - 4,000 Hz regelbar
Lowpass: 15 Hz - 4,000 Hz regelbar
Bandpass: 15 Hz - 4,000 Hz regelbar
Subsonic: -
Phase: -
Slope high- / lowpass: Butterworth 12 dB/Oct.
Slope subsonic / lowpass: -
Signal-to-noise ratio digital input: 105 dB (A-weighted)
Signal-to-noise ratio analog input: 105 dB (A-weighted)
Distortion (THD): < 0.005 %
Damping factor: > 200
Operating voltage: 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
Idle current: 2400 mA
Fuse: 3 x 30 A LP-Mini-fuse (APS)
Additional features: Active, adjustable crossover, bass boost, input mode switch, highlevel input with Advanced Diagnostics Error Protection (ADEP), Auto Remote switch, SPDIF Direct In switch, cable remote control for volume adjustment
Dimensions (H x W x D): 50 x 260 x 190 mm / 1.97 x 10.24 x 7.48”
* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)
- Audio system in car entertainment
- Car air cinditioning servicing / maintenance and repair
- Accessories retail
- Security system
- Car mats
- Solar films and tinting
- Car battery
- Car recorder
- Car power enhancement
Website: http://www.designerice.sg/
Facebook: https://www.facebook.com/DesignerICEEnterprise
Ad information
Features
“Ultra HD Class D” concept which combines the high-end sound quality of Class AB technology with the benefits of Class D amplifiers
Two speaker outputs with 490 Watts RMS each at 2 Ohms
Digital, optical signal input in SPDIF format including SPDIF Direct In switch for routing the digital input signal directly to the power stage
BurrBrown DA signal converter of the latest generation with a resolution of 32 Bit
Integrated, active crossover with highpass, lowpass, bandpass and configurable bass boost
Smart highlevel input with ADEP circuit
Cable remote control for volume adjustment
Compact design with low heat dissipation thanks to extraordinary efficiency
Technical data
Output power RMS / max.:
- @ 4 Ohms: 2 x 280 / 560 Watts
- @ 2 Ohms: 2 x 490 / 980 Watts
- @ 1 Ohm: -
- bridged @ 4 Ohms: -
- bridged @ 2 Ohms: -
Max. output power per channel*: Up to 600 Watts RMS @ 2 Ohms
Amplifier technology: Ultra HD Class D
Inputs:
2 x RCA / Cinch
2 x Highlevel speaker input
1 x Optical SPDIF (28 - 96 kHz)
1 x Remote In
1 x Remote control input
Input sensitivity:
RCA / Cinch 2 - 8 Volts
Highlevel 5 - 20 Volts
Input impedance RCA / Cinch: 10 kOhms
Input impedance highlevel: 13 Ohms
Outputs: 2 x Speaker output
Output voltage RCA / Cinch: -
Signal converter for digital input: BurrBrown 32 Bit DA converter
Frequency response: 10 Hz - 40,000 Hz
Bass boost: 0 - 9 dB / 40 Hz - 120 Hz
Highpass: 15 Hz - 4,000 Hz regelbar
Lowpass: 15 Hz - 4,000 Hz regelbar
Bandpass: 15 Hz - 4,000 Hz regelbar
Subsonic: -
Phase: -
Slope high- / lowpass: Butterworth 12 dB/Oct.
Slope subsonic / lowpass: -
Signal-to-noise ratio digital input: 105 dB (A-weighted)
Signal-to-noise ratio analog input: 105 dB (A-weighted)
Distortion (THD): < 0.005 %
Damping factor: > 200
Operating voltage: 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
Idle current: 2400 mA
Fuse: 3 x 30 A LP-Mini-fuse (APS)
Additional features: Active, adjustable crossover, bass boost, input mode switch, highlevel input with Advanced Diagnostics Error Protection (ADEP), Auto Remote switch, SPDIF Direct In switch, cable remote control for volume adjustment
Dimensions (H x W x D): 50 x 260 x 190 mm / 1.97 x 10.24 x 7.48”
* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)
Merchant information
More items from this seller
Email Enquiry
* indicates compulsory field.