Ad information
8 Channel DSP with 6 Channel Amplifier is the amp of choice for anyone who wants the best of everything in a very small package.
This amplifier give you 80 Watts per channel @ 4 Ohms and 120 Watts per channel @ 2 Ohms. Zapco was the very first company to give you a full function DSP on-board with in a car audio amplifier. That was in 2004, and it was the Class AB, Reference DC (Digital Control) Series. Those amplifiers and were immediately lauded for they're Zapco sound quality and the amazing versatility provided by the digital processor. But as AB amplifiers they were also quite large at a time when cars were becoming smaller and lighter. With the advances in Class D technology over the last 15 years Zapco have been able to get that same sound quality into the Z8 IV-8 in a smaller and more powerfull package. Compared to the multichannel Reference DC amp, the Z8 IV-8 will give you almost 40% more power and do it in less than 1/3 the size. With high power, graet Zapco sound quality and Z8 IV II DSP, we believe the Zapco ADSP-Z8 IV II-8 will be the dream amplifier for many audiophiles and tuners alike, and the amp of choice for anyone who wants the best of everything in a very small package.
Specifications
- DSP Processor: Cirrus Logic CS47048
- Power: 150 MHz/32 bit/48 KHz
- 8-Channels
- ADC: Cirrus Logic CS5368 24 bit/192 KHz
- ADC Dynamic Range/THD: 114 dB/-105 dB
- DAC: Cirrus Logic CS47048 32 bit/192 KHz
- DAC Dynamic Range/THD: 108 dB/-98 dB
- Low level (Pre)/Sensitivity: 8/1-5 VRMS
- High Level (Spk In)/Sens.: 6/2-20 V
- AUX Inputs/Sensitivity: 1/0.2-4 VRMS
- Optical IN: 24 bit-192 KHz
- Freq. Response (-3dB): 10 Hz - 22.5 KHz
- S/N Ratio only DSP Digital Input: 110 dBA
- S/N Ratio only DSP Analog Input: 106 dBA
- S/N Ratio Amp + DSP at max. power: 95 dBA
- THD+N only DSP Digital Input: 0,002 %
- THD+N only DSP Analog Input: 0,005 %
- THD+N Amplif. + DSP Analog Input: 0,07 %
- Crosstalk at 1 Khz only DSP: 90 dB
- Crosstalk Amplifier + DSP: 45 dB
- Amp Power @ 4Ω: 8 x 80 watts
- Amp Power @ 2Ω: 8 x 120 watts
- Amp Power @ 4Ω Bridged: 4 x 240 watts
- Amp Power @ 4Ω: 6 x 80 + 1 x 240 watts
- Amp Power @ 2Ω: 6 x 120 + 1 x 240 w. (4 Ω)
- F/R EQ: 1-6 ch Gr. & Par./31 poles
- Effect EQ: 7-8 ch Gr. & Par./11 poles
- Mute/Solo: Yes, each channel
- Time Align. (Range/Steps): 0/15 ms / 0.02 ms
- Max Delay (Cm/Steps): 515 cm / 0.68 cm
- Polarity: 0/180°
- Display (included): 1” LCD
- Display (optional): 3” LCD Touch-Screen
- Bluetooth Digital Streaming
- PC/Display Connection: USB/6-pin Mini DIN
- Unit Dimensions: 222(L) x 230(W) x 52(H)
- Display Dim.: 111(L) x 49(W) x 16(H)
Facebook URL: https://www.facebook.com/SingTrade-Marketing-Services-1482040458683011/
Ad information
8 Channel DSP with 6 Channel Amplifier is the amp of choice for anyone who wants the best of everything in a very small package.
This amplifier give you 80 Watts per channel @ 4 Ohms and 120 Watts per channel @ 2 Ohms. Zapco was the very first company to give you a full function DSP on-board with in a car audio amplifier. That was in 2004, and it was the Class AB, Reference DC (Digital Control) Series. Those amplifiers and were immediately lauded for they're Zapco sound quality and the amazing versatility provided by the digital processor. But as AB amplifiers they were also quite large at a time when cars were becoming smaller and lighter. With the advances in Class D technology over the last 15 years Zapco have been able to get that same sound quality into the Z8 IV-8 in a smaller and more powerfull package. Compared to the multichannel Reference DC amp, the Z8 IV-8 will give you almost 40% more power and do it in less than 1/3 the size. With high power, graet Zapco sound quality and Z8 IV II DSP, we believe the Zapco ADSP-Z8 IV II-8 will be the dream amplifier for many audiophiles and tuners alike, and the amp of choice for anyone who wants the best of everything in a very small package.
Specifications
- DSP Processor: Cirrus Logic CS47048
- Power: 150 MHz/32 bit/48 KHz
- 8-Channels
- ADC: Cirrus Logic CS5368 24 bit/192 KHz
- ADC Dynamic Range/THD: 114 dB/-105 dB
- DAC: Cirrus Logic CS47048 32 bit/192 KHz
- DAC Dynamic Range/THD: 108 dB/-98 dB
- Low level (Pre)/Sensitivity: 8/1-5 VRMS
- High Level (Spk In)/Sens.: 6/2-20 V
- AUX Inputs/Sensitivity: 1/0.2-4 VRMS
- Optical IN: 24 bit-192 KHz
- Freq. Response (-3dB): 10 Hz - 22.5 KHz
- S/N Ratio only DSP Digital Input: 110 dBA
- S/N Ratio only DSP Analog Input: 106 dBA
- S/N Ratio Amp + DSP at max. power: 95 dBA
- THD+N only DSP Digital Input: 0,002 %
- THD+N only DSP Analog Input: 0,005 %
- THD+N Amplif. + DSP Analog Input: 0,07 %
- Crosstalk at 1 Khz only DSP: 90 dB
- Crosstalk Amplifier + DSP: 45 dB
- Amp Power @ 4Ω: 8 x 80 watts
- Amp Power @ 2Ω: 8 x 120 watts
- Amp Power @ 4Ω Bridged: 4 x 240 watts
- Amp Power @ 4Ω: 6 x 80 + 1 x 240 watts
- Amp Power @ 2Ω: 6 x 120 + 1 x 240 w. (4 Ω)
- F/R EQ: 1-6 ch Gr. & Par./31 poles
- Effect EQ: 7-8 ch Gr. & Par./11 poles
- Mute/Solo: Yes, each channel
- Time Align. (Range/Steps): 0/15 ms / 0.02 ms
- Max Delay (Cm/Steps): 515 cm / 0.68 cm
- Polarity: 0/180°
- Display (included): 1” LCD
- Display (optional): 3” LCD Touch-Screen
- Bluetooth Digital Streaming
- PC/Display Connection: USB/6-pin Mini DIN
- Unit Dimensions: 222(L) x 230(W) x 52(H)
- Display Dim.: 111(L) x 49(W) x 16(H)
Merchant information
More items from this seller
Similar Items
Email Enquiry
* indicates compulsory field.