Tchernov Reference DSD Speaker Cable

The latest evolution of our flagship speaker cable builds on the ground-breaking DSC (Distributed Symmetric Conductor, Patent RU No.2652382U) architecture. The signal transmission is carried out by two lines consisting of three similar conductors, configured around a central damping SPVC cord in a hexagonal structure 3+3+1 with a maximum packing factor. The phase (L) and neutral (N) conductors are aligned in an alternating ring circuit. DSC enables the highest possible group wave speed, significant EMI reduction and better noise immunity up to 20-40 dB compared to an ordinary conductor. Reduced irradiation determines low and constant impedance in a wider frequency range and guarantees near-to-ideal amplifier-speaker matching regardless of design ethos and specifications. The SATI®/SASDB® insulation/binding combination significantly decreases the relative permittivity and signal energy losses within the dielectric. X-Shield® SE boosts EMI suppression in a wider frequency range from ELF to SHF. An integral multi-stranded BRC drain wire reduces the contact noise in the shield and maintains constant shield impedance at the lowest levels. The Reference DSC SC is jacketed with the highly elastic thermoplastic polyurethane (TPU) Elastollan® for unrivalled dielectric long-term stability, mechanical strength and efficient absorption of acoustic noise and vibrational loads. Sufficient flexibility derived from a relatively compact outer diameter makes the connection aesthetically pleasing. The gleaming Reference V2 spade & banana connectors made of 10 µ fully gold plated beryllium copper complete the truly meticulous product visualization. DSC design opens the new horizons of dynamics extension, definition and holographic soundstaging. The ability to transmit the fastest and most complex transient impulses results in a fabulous sonic perfection and musicality. The Reference DSC SC exceeds every expectation an audiophile could have of cabling in any implementation or price point. It offers musical fidelity that is second only to the Ultimate SC for about half of its cost.

• Reference DSD Speaker Cable - 2.0 Meter (Piece) $2,310.00
  
• Reference DSD Spearker Cable - 5.0 Meter (Pair) $9,640.00
  

Specifications:

• Type: High End shielded speaker cable
• Distributed Symmetric Conductor DSC: two 4.50 mm2 energy transmission lines, each comprised of three similar 1.50 mm2 (28 х 0.26 mm) BRC conductors, configured around a central damping cord in a hexagonal structure 3+3+1 with a maximum packing factor
• Insulation: SATI® with PTFE tapes
• Conductor damping: central elastic SPVC & extra radial cotton cords
• Dielectric binding: SASDB® with PTFE tapes
• Shield: X-Shield® SE with an integral drain wire
• Jacket: thermoplastic polyurethane (TPU) Elastollan®
• Protective cover: nylon sleeve
• Outer diameter:19 mm
• Termination: different variants with Reference V2 Banana or Spade connectors
• Available: in standard terminated lengths
• Country of origin: made in Russia