FEATURES:

• 4 channel amplifier
• Black finishing
• Power Rating: 130 Watt per channel @ 4 Ohm < 1% THD+N
• Sn Ratio: > 67 dBA (ref: 1 Watt into 4 Ohm)
• Incl. DSP 4to6 on board
• Only one software, always updated.
• 4 presets instead of 2.
• Low level DSP processed output (as the CH5-6 in the D2-100.4DSP).
• It works with RCD and RCD-mini.
• VERY IMPORTANT NOTE – READ CAREFULLY:
  • 4 Ohm ST or 8 Ohm BTL – CONTINUOUS SINEWAVE SIGNAL – pure resistive load or speaker load
  • 2 Ohm ST or 4 Ohm BTL – MUSICAL SIGNAL – pure resistive load or speaker load

SPECIFICATIONS:

• Target Powers (@ 4 Ohm): 130 Watt x 4 or 350 Watt BTL mode
• Target Powers (@ 2 Ohm): 175 Watt x 4
• Input Sensitivity (Power rating ref): 0.28 V ÷ 5.7 V (LL) / 0.8 V ÷ 16 V (HL)
• Special Features & Xover functions:
  • High Low Adapter
  • Autosense power-on (High Level only, SE or BTL mode)
  • Hand-free, Navigator, AUX inputs
  • Auto-Fading between inputs
  • Signal Mix capability
  • USB cable for PC connection
  • BT wireless module for PC connection (optional)
  • GUI (Windows XP,VISTA 32/64bit and 7 32/64bit)
  • Available hardware presets: two
  • External memory for additional presets (optional)
  • 30 bands parametric equalizer
  • Implemented filters type all standard filters available
  • HP frequency range for each channel Hz 10 ÷ 20000
  • LP frequency range for each channel Hz 10 ÷ 20000
  • HP and LP filter slope for each cell dB/Oct 6 to 24 (up to 48 if cascaded)
  • Band pass allowed yes
  • Variable “Q” 0.25 ÷ 40
  • Time delay ms 0 ÷ 15 (0,02 steps)
  • Phase inversion for each channel 0 / 180°
  • Gain level for each channel dB -115.5 ÷ 6
  • Remote Volume Control (optional)
• Size & Weight: 310x200x50mm, 2,6Kg