Perfect OEM integration:

Powerful DSP amplifier optimized for factory radio use. Six analog inputs up to 30 V, flexible routing, 3 x input EQ and delay. With 4 x 50 Watts + 2 x 90 Watts ideal for active and semi-active systems, as well as classic front + rear + sub application. With two digital inputs (SP-Dif and BT+) and two processed line outs ready for the future.

Transducerless high-speed PWM power amplifiers:

High-efficiency PWM output stages with the fastest carrier frequency in the world today (> 2 MHz). The modulation is done without DAC directly from the 48 kHz TDM signal of the DSP, thus the noise floor goes to zero and THD+N ~ 0.02 % / 1 W.

INPUT:

• 4 x analog inputs balanced (high-level) up to 30 V
• 2 x analog inputs switchable high level / low level)
• 1 x digital input SP-Dif optical (8 kHz - 96 kHz sampling rate)
• 1 x bluetooth port with SP-Dif - TTL (8 kHz - 96 kHz, e.g. for Mos_BTS bluetooth streaming module)
• Bluetooth extended digital audio port (BT+)
  (flexible 8 kHz - 384 kHz synchronous digital input for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS-LD4C BT streaming module or extended analog inputs)

DSP:

• 912 MHz, 32-bit audio port, 64-bit core
• Double precision 56 Bit filter calculation
• 6144 SIMD instructions per sample at 48 kHz
  ASRCs from 1:8 up to 7.75:1 ratio and 139 dB DNR

CONTROL:

• 1 x remote connector (analog, for RTC.2 roti remote control)
• 1 x bluetooth control port (Connection MOS-BT3.0 (app control), RC-Can (CAN-Bus control), MOS_USB2.0 (programming dongle)
• 1 x remote out, 1 x remote in, auto remote for high level connection
• Connections with MOLEX plug contacts
• Very small size with low heat generation, best suited for installation behind panels

OUTPUT POWER/OUTPUT SIDE:

• Output power @ 4Ω: 4 x 50 Watts (channel 1 - 4) 3-Ohm stable (not bridgeable!)
• Output power @ 4Ω: 2 x 90 Watts (channel 5 - 6) 2-Ohm stable / bridgeable
• Output power @ 4Ω: 4 x 50 Watts + 1 x 240 Watts (bridged channel 5 + 6)
• Line Out: 2 x 2 Vrms Line Out

SPECIFICATIONS:

• Input voltage: 0,3 - 15 V
• Overall efficiency: > 80 %
• Auto-On (only High Level): Off - BTL
• Dimensions: 150 x 133 x 46 mm
• Weight: 800 Gramm