Oil Primer is an advanced formulation for the internal cleaning of engines, manual gear boxes and differentials. Containing lubricants and extreme bearing pressure components for the protection of all moving parts during the cleaning process.

• Designed for use at every service interval
• Compatible with all mineral and synthetic oils

Oil Primer 125ml

Designed for use in all small engines up to and including 1.9 Litre Engines

Oil Primer 250ml

Up to and including up to 2.9 litre engines

Oil Primer 500ml

For use in 3 Litres Engines and Above. Compatible with all Mineral and Synthetic Oils

Areas of application for cleaning

• Drive shaft bearings
• Oil sump
• Piston rings and their seats
• Oil pick up assembly
• Cylinder liners
• Pump
• Oil lines and galleries
• Cam shaft and cams
• Lubricated turbo charger
• Mechanical and hydraulic valve lifters
• Injection pump
• All lubricated surfaces where oil circulates under pressure

Types of deposits

• Soft/hard carbon, tars, varnishes, lacquers, sludge, acid corrosion and condensates

Method of application

• Always check the oil level of the dipstick, and ensure the reading is normal.
• AFTER the product has been added to the crank case.
• BEFORE changing the old oil and filter, add the Oil Primer to the engine oil.
• Start the engine and let it run at idle for 10 minutes. Stop the engine, replace oil and filter.  Check efficiency of crankcase ventilation and exhaust gasses.

Note

• Before adding the treatment to the used oil, check its level to ensure that with the treatment added is normal

Lambda's Oil Primer at work dissolving and progressively removing sludge from engine valve gear.

• Cleans and restores all internal surfaces in th bottom hald of the engine