CELLINK BATTERIES

Advanced Power Solutions

The SAFEST way to power your dashcam when you are away.

​Enjoy BlackVue's parking mode with a peace of mind using the latest Cellink battery.

The Cellink is built with the safest battery technology using LiFePO4 (lLithium Iron Phosphate) which will keep your BlackVue dashcam running for long hours in parking mode with just 50 minutes of charging.

The latest Cellink NEO 8+ comes with 25% more power (*25% more power than Neo 6) and USB 3.0 power outlet for fast charging of accessories such as mobile router and smartphone.

• Highest Battery Capacity

  (25% more than former NEO 6)

• Bluetooth built-in

  (support Battery Manager App)

• 5V USB 3.0 high speed charging
• ​12.8V | 7,500mAH | 96Wh

Why Cellink Battery for Parking Mode?

• Advanced Technology

   

  

   

  Rapid Charging Technology, charges fully within 40 minutes of driving.

  Advanced Microcontroller (MCU) for efficient charging control.

   

• Long Lasting

   

  

   

  ​High capacity battery.

  Supplies up to 48 hours of power in parking mode.

  Using the safest cell material, LiFePO4.

   

• Reliable

   

  

   

  Long cycle life up to 2,000 cycle.

  Stable performance.

  ​Manufactured in Republic of Korea since 2013.

   

• Protect

   

  

   

  Protect new car warranty.

  Support simple installation to cigar jack socket.

  Prevent electrical errors especially on continental cars.

  Covered with product liability insurance of up to $500,000.

   

• Safe

   

  

   

  Protect car battery performance and life.

  High temperature Cuts-Off and Protection Circuit Module (PCM).

  ​Short Circuit Protection Control

   

• Proven

   

  

   

  Approved and used by most car agents in Singapore.

  Certified with CE standard; meeting high safety, health and environmental protection requirements.

How does it works?

Cellink Battery supports two charging modes:

• Simple installation:

  Just plug the battery into the cigarette lighter socket of your vehicle.

• Hardwired installation:

  For fastest charging speed, connect the battery to the fuse panel.

When vehicle's ignition is switched OFF, Cellink Battery supplies power to the dashcam independently until power depletes.

Above setup will not interfere with car battery's performance and life.

Other Power Solutions is available but using power tapped from your car battery:

1. Power Magic Pro (add-on hardwiring kit)
2. Hardwiring cable for some supported dashcam models

Cellink Battery the Advanced Power Solution for your dashcams

Cellink Battery the Power Solution for your dashcam

Smarter with Bluetooth built-in

Connects to your Cellink NEO easily with dedicated app.

​Cellink battery is normally installed in the location out of your sight.

Cellink NEO 8+ supports Bluetooth for compatibility with free Cellink NEO Battery Manager app (iOS/ Android) hence you can easily connect with your smartphone.

When charging, the app displays charge percentage, charging voltage and expected remaining time until full charge.

​When ignition is off, the app informs you of the expected Parking Mode remaining time until depletion, based on the dashcam’s power consumption.

Technical Specifications:

• Capacity: 12.8V | 7,500mAh | 96Wh
• Expandable: Yes
• Works independantly: Yes
• Bluetooth built-in: Yes
• App Name: Cellink NEO Plus
• USB 3.0 Power Outlet: Yes
• Power duration: Up to 30 hours to dual-channel dashcam
• Charging Time:

  ~50min [Hardwire | 9A]

  ~1hr 40min [Cigar jack | 5A]

• Default Charging Cable: Hardwire cable (to fuse panel)
• Colour / Size / Weight: Black / 157 mm (W) x 207 mm (L) x 39.5 mm (H) / 1.7kg
• Battery Cell: Lithium Iron Phosphate (LiFePO4)
• Case material: Aluminium
• High Temperature Cut-off: ~80ºC
• Input Voltage:

  - Cigar jack: 12 V ~ 17 V / 6.5 A (max)

  - Hardwired: 12 V ~ 17 V / 13.5 A (max)

• Output Voltage (dashcam): 11 V ~ 14.5 V / 2 A (max)
• Output Voltage (USB): 5V / 2 A (max)

Power Duration (Usage Time):