Not all drivers are created equal, and the visually inspiring Elate Carbon woofers were developed with next-level performance in mind. These new drivers get their Carbon moniker from their triple-layer cones from which they are derived, consisting of two layers of carbon fiber sandwiching a Rohacell foam core. These proprietary cones were developed to give them incredible stiffness, high damping and light weight—the trifecta for cone performance.

Paired with a large 3-inch diameter Hexatech aluminum voice coil, titanium former, and Morel’s EVC motor technology, the Elate Carbon achieves remarkable control and low distortion which translates to highly transparent and bass-rich sound reproduction.  

ELATE CARBON MW6 $1888
Specifications 

• Nominal Impendance (ohm): 4
• Power Handling Wrms: 180
• Max. Trans. Pwr Handling Wrms (10ms): 1000
• Sensitivity (2.83 V/1M) dB: 87
• Frequency Response Hz: 30 - 4000
• Resonant Freq. Fs Hz: 45
• Voice Coil Diameter mm (inch): 75 (3)
• Voice Coil Height mm (inch): 14.50 (0.57)
• Voice Coil Type/Former: Titanium
• Voice Coil Wire: HexatechTM aluminium
• DC Resistance ohm: 3.6
• Voice Coil Induct. @1 kHz (mH): 0.615
• Magnet System: Double magnet rear vented
• HE-Magnetic Gap Height mm (inch): 5 (0.20)
• B-Flux Density (T): 0.75
• BL Product/BXL: 6.51
• Max. Linear Ex./Xmax mm (inch): ±4.75mm (0.18)
• Suspension Compliance CMS - mm/N: 0.67
• Electrical Q Factor QES: 0.47
• QTS: 0.43
• QMS: 7.19
• Mech. Resistance RMS- N . S / M: 1
• Moving Mass MMS - gr/ounce: 18 (0.63)
• Equiv. Can Air Load VAS - L (cu.ft3): 13.3 (0.47)
• Effective Piston Area SD sq.cm (sq.inch): 120 (18.6)
• Cone Type: One-piece formed
• Cone Material: DPC
• Unit Diameter mm (inch): 165 (6.50)
• Mounting Dept mm (inch): 61 (2.40)
• Mounting Cutout mm (inch): 141 (5.55)
• Net Weight Kg (lb): 1.18 (2.60)

ELATE CARBON MW9 $2188
Specifications 

• Nominal Impendance (ohm): 4
• Power Handling Wrms: 200
• Max. Trans. Pwr Handling Wrms (10ms): 1000
• Sensitivity (2.83 V/1M) dB: 89
• Frequency Response Hz: 25 - 3000
• Resonant Freq. Fs Hz: 44
• Voice Coil Diameter mm (inch): 75 (3)
• Voice Coil Height mm (inch): 14.50 (0.57)
• Voice Coil Type/Former: Titanium
• Voice Coil Wire: HexatechTM aluminium
• DC Resistance ohm: 3.6
• Voice Coil Induct. @1 kHz (mH): 0.615
• Magnet System: Double magnet rear vented
• HE-Magnetic Gap Height mm (inch): 5 (0.20)
• B-Flux Density (T): 0.75
• BL Product/BXL: 5.15
• Max. Linear Ex./Xmax mm (inch): ±4.75mm (0.18)
• Suspension Compliance CMS - mm/N: 0.36
• Electrical Q Factor QES: 0.61
• QTS: 0.56
• QMS: 6
• Mech. Resistance RMS- N . S / M: 1.2
• Moving Mass MMS - gr/ounce: 30 (1.05)
• Equiv. Can Air Load VAS - L (cu.ft3): 30.9 (1.1)
• Effective Piston Area SD sq.cm (sq.inch): 219 (33.95)
• Cone Type: One-piece formed
• Cone Material: DPC
• Unit Diameter mm (inch): 222 (8.75)
• Mounting Dept mm (inch): 71 (2.80)
• Mounting Cutout mm (inch): 192 (7.56)
• Net Weight Kg (lb): 1.42 (3.13)