3M Silicone Lubricant (Dry Type) eliminates rubber squeaks, prevents sticking and seals out moisture. Our lubricant contains no petroleum oils to stain fabrics. Formulated for extreme conditions, it will not freeze at -28°F nor degrade at 350°F. Silicone lubricant is available in both wet and dry formulas.

Directions for Use:

1. Turn spray tip so opening points to dot on rim of can.
2. Hold can upright and push actuator on top of can all the way down to apply a uniform spray. Position the actuator away from your face before spraying.
3. If using the extension tube, insert it in to the actuator using a twisting motion.
4. Best results are obtained when material is at room temperature. Higher temperatures increase the pressure in the can, and lower temperatures reduce the pressure.
5. Hold can 8" to 10" from surface to be sprayed. Apply evenly and use sparingly.
6. For hard to reach or small surfaces, use the extension tube.
7. On rubber, leather, and vinyl; apply and wipe with a cloth.