SOFT TOP CLEAN & PROTECT COMPLETE KIT

Everything you need to clean and protect fabric convertible soft top hoods.

Regularly cleaning your soft top will keep green algae at bay and its original colour looking vibrant. Our Soft Top Clean & Protect Complete Kit contains everything you need to clean and protect your mohair, double duck, fabric or canvas fabric hood.

If you have a vinyl hood, clean thoroughly with Bodywork Shampoo Conditioner then protect with Bumper & Trim Gel.

Contents:

• 500ml Soft Top Cleaner
• 500ml Soft Top Protector
• 1 x Cleaning Sponge
• 1 x Soft Top Protector applicator sponge

How to use Soft Top Cleaner:

1. Working out of direct sunlight, brush and vacuum the hood to remove any loose dirt. Dampen the roof with water.
2. Shake Soft Top Cleaner well. Mix 250ml of Soft Top Cleaner solution with 500ml of water, in a suitable container. Test on a small inconspicuous area for colourfastness.
3. Saturate the white cleaning sponge provided in the diluted product, start by concentrating on any stains or green algae first.
4. Continue by saturating the sponge and spreading the cleaner onto the fabric hood allowing even coverage (make sure you use the full contents of the container). Once an even coverage has been achieved start to work the chemical into the hood. If your hood is very dirty, cover with a plastic sheet and allow the cleaner to continue working overnight. Wipe away product runs from glass and paintwork with a damp microfibre.
5. Using a low-pressure hose, rinse off the Soft Top Cleaner until there is no cleaner left on the hood. Do not use a pressure washer to remove the cleaner. It is important that all the cleaner is removed before moving onto Soft Top Protector. Any remaining cleaner will affect the performance of the Soft Top Protector. Now, dry the vehicle leaving the soft top damp and move on to apply Soft Top Protector, reading the instructions carefully.

How to use Soft Top Protector:

1. Clean roof with Soft Top Cleaner and leave damp. Rinse the blue Soft Top Protector applicator under a tap for a few seconds then squeeze until damp. (This will help activate the applicator)
2. Working out of direct sunlight, pour the Soft Top Protector onto the applicator and apply systematically to the hood to ensure even coverage, using approximately half of the bottle contents. Ensure the roof is evenly coated.
3. Remove any overspray from paintwork and glass immediately. We recommend using Fast Glass to remove overspray from glass.
4. Allow the protector to fully dry before driving. Store product at room temperature and do not allow to freeze.