Jump to content

CIVIC Tail light


Ericyip
 Share

Recommended Posts

Neutral Newbie

Hello all,

 

Can 2002 model VTI change tail light to the lastest model(2003/2004) which is nicer in look... nt the dull type...

↡ Advertisement
Link to post
Share on other sites

Neutral Newbie

sorry for so many question ah.. the number you gave me is a shop? any address?

Link to post
Share on other sites

Yes! It can. Tail lights are just car parts that is used to customize the car. I used smoke tail light to improve my car's appearance. I got it from tail light list.

You don't sounds like a car user but is trying to sell your website for FREE!

Link to post
Share on other sites

 

1

 

Wear gloves before getting started. The Civic's replacement tail light bulbs reuse the old socket. You'll be touching the glass part of the bulb to replace it. Doing so with your hands can cause damage to the bulb.

 

 

2Open the trunk and access the corner for the tail light you need to replace. In the rear corner (closest to the tail light), you'll find a Phillips screw within plastic fasteners. Remove the Phillips screw from the fastener.

 

 

 

3Pull the fastener out of its mount to free the corner trunk lining. Pull the lining back to access the tail light.

 

 

 

4Remove the bulb socket by turning it counterclockwise. Pull the old bulb out of the socket with your hand. Fully insert the replacement bulb into the socket.

 

 

 

5Reinsert the socket in its place. Turn it clockwise. Push the corner trunk lining back into position. Push the plastic fastener into its mount, and then replace and tighten the Phillips screw.

Changing the Tail Light on a Civic SI Hatchback (2001 to 2005)

 

 

 

1Wear gloves before getting started. The Civic's replacement tail light bulbs reuse the old socket. You'll be touching the glass part of the bulb to replace it. Doing so with your hands can cause damage to the bulb.

 

 

 

2Open the rear hatch and examine the corner in the cargo compartment. Find the plastic access door near the tail light. Insert a flat head screwdriver into the access door's indention. Pry the door open carefully.

 

 

 

3Remove the bulb socket by twisting it counterclockwise. Push the glass part of the bulb into the socket, and turn it counterclockwise to remove it from the socket.

 

 

 

4Push the replacement bulb into the socket. While gently pushing down, turn it clockwise to attach it. Reinsert the bulb socket into place; turn it clockwise. Position the access door into place; push it firmly to reattach it.

 

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...