Jump to content

Mass Order: Chevy Chrome Car No. Plate Frame


Gamax
 Share

Recommended Posts

Neutral Newbie

Guys take a look at this Car no. Plate frame. Ordering it from US directly and the cost for the car plate is around SGD$25

 

DESC:

Two Different Design A & B to choose from

100% Brand new

Guarantee Rust free

Metal Cap Included

all weather condition

easy installation

 

Font: Brushed Chrome ALuminium Factory Font

Size: 6.25" x 12.25" US Standard Size

Material: Solid Cast Metal

Weight: 10 ounces Solid Metal

 

Anyone Keen? The Promotion price is only for limited period.

 

Wonder if it can be use in SG and the Size fit SG car?

 

Anyone keen to order with me if the car plate can be use in SG?

post-71-1112206746_thumb.jpg

post-71-1112206747_thumb.jpg

↡ Advertisement
Link to post
Share on other sites

FYI.

http://onemotoring.com.sg/...e_licence_plate.html

 

 

[/size]

Vehicle Licence Plate statics.0.gif statics.0.gif

 

In Singapore, we have a variety of vehicle licence plates and these are dependant on the vehicle's category and its intended usage. The following are the requirements for its installation.

 

The vehicle licence plate shall consist of the index mark and the registration number assigned to the motor vehicle. The index mark and the registration number shall be suffixed with a letter of the alphabet, which serves as the official reference. The vehicle licence plate shall be exhibited at the front and at the back of the motor vehicle not more than one metre from the ground in a vertical position so that every letter or figure of the vehicle licence plate is easily distinguishable. No other figures or letters and no design advertisement or ornamentation shall be placed near the identification mark on the vehicle licence plate in such a manner as to render it more difficult to read or distinguish when the vehicle is in motion.

 

Vehicle licence plates normally have white letters and figures on black background for both front and rear of a vehicle. However, if the vehicle licence plate is made of reflex reflecting material, the front licence plate will consist of black letters and figures on a white background, and the rear licence plate will consist of black letters and figures on a yellow background.

 

There are exceptions to the following categories of vehicles and their vehicle licence plates shall be sealed:

  • in the case of restricted usage (RU) vehicles, the letters and figures are white on a red and green background;
  • in the case of vehicles registered under the Off-Peak car (OPC) scheme, the letters and figures are white on a dark red background;
  • in the case of vintage cars and classic cars, the letters and figures are white on a dark red and yellow background;
  • in the case of PU-registered vehicles, the letters and figures are white on a green background; and
  • in the case of special purpose licence (RD) vehicles, the letters and figures are white on a yellow and blue background.

The diagrams of a typical vehicle licence plate are shown below:

 

vehicle_licence_plate.MainPar.0005.Image.gifvehicle_licence_plate.MainPar.0006.Image.gifstatics.0.gifstatics.0.gif The vehicle licence plate shall meet the following requirements:

  • the letters and figures are 70 mm high, 50 mm wide and 10 mm broad;
  • the space between adjoining letters and between adjoining figures shall be 10 mm;
  • the space between the letters and figures shall be 20 mm;
  • a margin between the nearest part of any letter or figure and the top or bottom of the vehicle licence plate shall be 10 mm; and
  • a margin between the nearest part of any letter or figure and the sides of the vehicle licence plate shall be 20 mm.

In the case of motorcycle, the front licence plate may be reduced by halved of the above dimensions due to the slight curvature of the mudguard. The rear licence plate of motorcycle shall meet the following requirements:

  • the letters and figures are 50 mm high, 30 mm wide and 5 mm broad;
  • the space between adjoining letters and between adjoining figures shall be 10 mm;
  • the space between the letters and figures shall be 20 mm; and
  • a margin between the nearest part of any letter or figure and the top, bottom and sides of the vehicle licence plate shall be 10 mm.

Some examples of Singapore vehicle licence plates are shown below:

 

vehicle_licence_plate.MainPar.0008.Image.gif

Edited by Gadgeter
Link to post
Share on other sites

Neutral Newbie

i presume cannot lah.... [shakehead]

 

Well the others countries cars got all the luck...

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...