Jump to content

Toyota Altis bodykit

Mark

By Mark,
in Cosmetics

 Share

Recommended Posts

Mark

Mark

Neutral Newbie

Any Altis drivers who has done up their ride?

 

I am interested to do mine but do not know any place to go to. I see some badly done up bodykits that protrude above the surface of the existing stock bumpers. They are really bad workmanship. Some you can even see that it is not fully in contact with the bumper. The gap you can actually slot in a cashcard.

 

Anyone who knows of any good installation places, with good workmanship and skill???

↡ Advertisement
Link to post
Share on other sites
Vivioman

Vivioman

Neutral Newbie

I just sent my bodykit to Yew Lip at Sin Ming....will be installing it tomorrow after it is sprayed today...had some good reviews about the place, hope I will have success with my kit! keke [sweatdrop]

 

119 Blk 15 Sin Ming Industrial Estate, Sector A

Contact: Angie Soh 64536600 [thumbsup]

Link to post
Share on other sites
Mark

Mark

Neutral Newbie
  • Author

Hi, would you be so kind to share your after result? Would like to see the outcome of it. Bet you must be super eager to see the results.

 

Good luck.

Link to post
Share on other sites
Vivioman

Vivioman

Neutral Newbie

I got a Mugen kit, but only installed the front lip, side skirts and rear lip.

 

The paintwork at Yew Lip is good, but the kit, being a replica, does not fit very well 100%.

 

However, I am happy with it. Will try to post some pics tomorrow.

 

Cheers! [thumbsup]

Link to post
Share on other sites
Sturtles

Sturtles

6th Gear
(edited)

US cars have their lamps shining more on the right.. not advisable as it will blind right hand side drivers such as singapore.

 

Purpose of the angled beam is for lighting up road signs, which is on our left, whereas in states, its on the right.

 

Maybe you can try shops carrying for jdm camrys

Edited by Sturtles
Link to post
Share on other sites
Phochem

Phochem

Neutral Newbie

mine is a aus made Camry. No pro at the angle as the front headlamp can DIY leveling. DIYed myself when i dismantled my headlamp housing for maintainance. Shld hav a leveling knob for vertical and horizontal leveling on the headlamp housing. thumbsup.gif

Link to post
Share on other sites
Evildoer

Evildoer

Neutral Newbie
(edited)

i always wanted to meet this angie i hear so much abt....does yew lip do front mesh wire grill????

Edited by Evildoer
Link to post
Share on other sites
Dfx16

Dfx16

6th Gear

If you dont mind paying a little ex for a peace of mind

I recommend Solomon Brothers (Bodykits Shop)

Rest assure it kits quality and the workmanship + paint job (3rd party installer and painter which he trusted that can do a very good job)

Solomon will personally QC it to ensure all perfectly done

I myself had changed 2 front bumpers from them

Very satisfy customer

 

Any Altis drivers who has done up their ride?

 

I am interested to do mine but do not know any place to go to. I see some badly done up bodykits that protrude above the surface of the existing stock bumpers. They are really bad workmanship. Some you can even see that it is not fully in contact with the bumper. The gap you can actually slot in a cashcard.

 

Anyone who knows of any good installation places, with good workmanship and skill???

Link to post
Share on other sites
Dfx16

Dfx16

6th Gear
(edited)

I cant advise for its price as i'm driving a Swift

Here's it webby http://solomonbrothers.sg/

If i'm not wrong recently they had many new kits just shipped in

Maybe u can ring Solomon to check it out

Just tell him (Check PM) intro you

Maybe he might give u some discount

Maybe only :)

Edited by Dfx16
Link to post
Share on other sites
Solomon

Solomon

Neutral Newbie
Any Altis drivers who has done up their ride?

 

I am interested to do mine but do not know any place to go to. I see some badly done up bodykits that protrude above the surface of the existing stock bumpers. They are really bad workmanship. Some you can even see that it is not fully in contact with the bumper. The gap you can actually slot in a cashcard.

 

Anyone who knows of any good installation places, with good workmanship and skill???

 

1st of all I hv to say thks to Bro DFX for the support n recommendation, in fact gd quality of coz will make a major diff, interms of the fitment n smooth surface, but again from my experience no matter how gd is the kit, if the installer n the spray paint not work properly, also will make yr car looks awful. Anyway, in order to choose the one u like, 1st thing 1st, u hv to kw wat u type of design u r looking for as well as full bumper replacement type n add on lips type. The best is whenever u feel free pls drop by to my shop at blk 4014 #01-460 Amk Ind Park 1 Singapore so tat we can discuss further. PLs advice

Link to post
Share on other sites
Mugenaccordr

Mugenaccordr

Neutral Newbie

Actually. For bodykit to fit nicely on the actual car is almost impossible. So to maximise all gaps and fittings, go for rivoting on your bodykit. Cuz installation is done using rivots and painters will putty over the gaps and rivot then spray. this looks like the kit is on the car body perfectly. but will crack in long term basis and nearly irreversible. Other than this, bolt on method for bodykit is not as nice. but its reversible. =)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...