Do they sell headlight covers only?

[attitude777]

Headlights are a little fogged. Was quoted 250 to sand/repolish the cover.

Alternatively i looked at new headlight sets but headlights are functioning.

I turned to taobao,and found many random useful parts, but no head light covers.

Are there even such things for sale? :)

[Ct3833]

  On 12/31/2016 at 10:37 AM, attitude777 said:

Headlights are a little fogged. Was quoted 250 to sand/repolish the cover.

 

Alternatively i looked at new headlight sets but headlights are functioning.

 

I turned to taobao,and found many random useful parts, but no head light covers.

 

Are there even such things for sale? :)

Most of the headlights are one integrated unit, there is no cover unless the headlight design of your car is different. $250 sounds too expensive, yiu may want to ask ine or two more shop for quote. car polishing shop should be able to do the job?

[attitude777]

  On 12/31/2016 at 10:48 AM, Ct3833 said:

Most of the headlights are one integrated unit, there is no cover unless the headlight design of your car is different. $250 sounds too expensive, yiu may want to ask ine or two more shop for quote. car polishing shop should be able to do the job?

Thanks. Car polishing service can also restore the headlights?

 

The surface of the headlights feels a little grainy too.

[Kb27]

Go to autobacs, find a headlight polisher and diy.

[GLZT]

  On 12/31/2016 at 11:20 AM, Kb27 said:

Go to autobacs, find a headlight polisher and diy.

Depends on the foggy part is inside or outside. Inside have to remove the cover and do.

[attitude777]

  On 12/31/2016 at 11:26 AM, GLZT said:

Depends on the foggy part is inside or outside. Inside have to remove the cover and do.

I realised it is not that difficult to remove.

 

Ok. Will try autobac headlights solution and polish in and out.

[Ct3833]

  On 12/31/2016 at 11:43 AM, attitude777 said:

I realised it is not that difficult to remove.

 

Ok. Will try autobac headlights solution and polish in and out.

Hi, those polishing contains abrasives that will damage the car paintwork. Before you start work , make sure you tape up the paint surrounding the lights to avoid damaging your paintwork.

[Kangadrool]

Best is to leave it as it is... unless you are changing it.

 

The cataracts are there to remind you that your ride is ageing and need replacement. Good motivation for you to work harder for the next ride.

[RadX]

  On 12/31/2016 at 12:36 PM, Kangadrool said:

Best is to leave it as it is... unless you are changing it.

 

The cataracts are there to remind you that your ride is ageing and need replacement. Good motivation for you to work harder for the next ride.

 

 

 

after his Sec 2 lah....hor @attitude777

[Kb27]

This one is quite safe to polish headlights.

 

[attitude777]

  On 12/31/2016 at 12:43 PM, RadX said:

after his Sec 2 lah....hor @attitude777

 

 

[inlinesix]

Rem that headlight needs water tight seal.

[13177]

Headlight polishing not really have use de, the headlight still looks foggy and improved slightly a bit only.

[yokechye]

Use toothpaste to try first

Edited January 22, 2017 by yokechye