Jump to content

Mazda 5 - requesting owners feedback


Dgeralds
 Share

Recommended Posts

  On 3/31/2021 at 1:09 PM, Denise_mag said:

So glad to know that, Shonshu!

Can I know if you are using istop? Does istop help in fuel saving?

Thanks much!

Expand  

Good morning Denise,

Yes, I am using i stop. It takes some time to get use to it, especially the reignition.  It never fails to shock me initially.  Haha. 

I don't have any saving numbers with regards to istop in fuel saving. I just let it be. But mentally, I think it does save some fuel.

Have a great day! 

↡ Advertisement
  • Praise 1
Link to post
Share on other sites

@Denise_mag Congratulations, enjoy the ride.. Feel free to ask any questions in this Forum


@Shonshu & other M5 owners, what wiper blades are you all using. The original ones were good then I changed them to brand new Bosch and they judder & squeak loudly. 

  • Praise 1
Link to post
Share on other sites

  On 4/1/2021 at 3:40 AM, Cwinedine said:

@Denise_mag Congratulations, enjoy the ride.. Feel free to ask any questions in this Forum


@Shonshu & other M5 owners, what wiper blades are you all using. The original ones were good then I changed them to brand new Bosch and they judder & squeak loudly. 

Expand  

Hi Cwinedine, 

I have tried many brands of wipers too and most of them were not up to expectations.  It is the same as what you described. 

Finally,  I got this brand and they serve well. Do take a look and ask the seller if you have any questions.  I bought this set and was advised by the seller to put in message " wipers for Mazda 5".

I am really happy with this current wipers. Hope this helps!

 

Screenshot_20210402-090256_Shopee SG.jpg

Link to post
Share on other sites

Neutral Newbie
  On 2/24/2018 at 12:53 PM, Law_wish said:

Thanks for the reply. Went to Tong Lee Wee. My car is almost 2 years old so no warranty. Qouted me $100 for new sd with new software. Agreed to it but can't work with new sd card. Then told me is the module hard disk spoilt. Quoted me $200. I rejected it and ask them put back the original card. Went home take out the module and saw a reset button on the module. Press the reset button, start my engine and GPS is working since then. I think I will never go back to this shop ever again. Looks like chop carrot. Think I stupid.

Expand  

Hi Law Wish?

May I asked where is the reset button located near to? I’m trying to reset it by using hand to touch/feel.

Link to post
Share on other sites

Turbocharged

This is the only "reset" button I can find.

Disclaimer : To be honest, it didn't always work for me. 

circulation.png

  • Shocked 1
Link to post
Share on other sites

Neutral Newbie
  On 4/24/2021 at 2:34 AM, Didu said:

This is the only "reset" button I can find.

Disclaimer : To be honest, it didn't always work for me. 

circulation.png

Expand  

Hi Didu,

Where is this icon located? on the module itself and the module is located above the glovebox?

  • Haha! 1
Link to post
Share on other sites

Neutral Newbie

Hie guys.. Need help here.. Just bought a Mazda 5.. It came with 18" and AP Racing Brake calliper.. Can I revert back to its original rims of 16" and still using that AP Racing Brake.. Coz its very good.. Advice pls.. TIA..😁

Link to post
Share on other sites

  On 4/29/2021 at 4:30 AM, DinoBoy said:

Hie guys.. Need help here.. Just bought a Mazda 5.. It came with 18" and AP Racing Brake calliper.. Can I revert back to its original rims of 16" and still using that AP Racing Brake.. Coz its very good.. Advice pls.. TIA..😁

Expand  

The braking system is separate from the rims. Before you purchase your new rims, just check that your 16" rims does not contact with the brake callipers, it should be ok.

  • Praise 1
Link to post
Share on other sites

Neutral Newbie
  On 4/30/2021 at 3:12 AM, andrewyewkc said:

The braking system is separate from the rims. Before you purchase your new rims, just check that your 16" rims does not contact with the brake callipers, it should be ok.

Expand  

Thanks for the reply.. So apparently there are 16" that can fit in with AP Racing calliper. I asked at carousell regarding an original mazda 16" rims but they say cannot fit in.. Anyone know which 16" can fir in AP Racing calliper.. 18" rims the fuel is crazy.. 😭

Link to post
Share on other sites

  On 4/2/2021 at 1:08 AM, Shonshu said:

Hi Cwinedine, 

I have tried many brands of wipers too and most of them were not up to expectations.  It is the same as what you described. 

Finally,  I got this brand and they serve well. Do take a look and ask the seller if you have any questions.  I bought this set and was advised by the seller to put in message " wipers for Mazda 5".

I am really happy with this current wipers. Hope this helps!

 

Screenshot_20210402-090256_Shopee SG.jpg

Expand  

Thanks Buddy, will give it a try👍

Link to post
Share on other sites

  On 4/30/2021 at 3:36 AM, DinoBoy said:

Thanks for the reply.. So apparently there are 16" that can fit in with AP Racing calliper. I asked at carousell regarding an original mazda 16" rims but they say cannot fit in.. Anyone know which 16" can fir in AP Racing calliper.. 18" rims the fuel is crazy.. 😭

Expand  

Is your AP Racing a big brake kit or just calipers only? Any picture to share?

Link to post
Share on other sites

@DinoBoy In order to find out if the  16" rims can fit, whats the size of the rotors, that's the most crucial followed by the rims offset to determine if it will hit the spokes of the rims

for example based on the rotor size/rims
286mm / 15"
305mm / 16"
320-330mm / 17" 
350mm / 18"

If it's 330mm rotors, then 16" won't fit, 17" will strike a balance between comfort & fuel efficiency. I'm on 205/50/17 tyres hence FC is not compromised, similar to my previous 205/55/16 setup. 

Link to post
Share on other sites

  On 4/30/2021 at 6:00 AM, DinoBoy said:

Its this one.. TIA.. 😁

Screenshot_20210430-113817_Chrome.jpg

Expand  

This is a big brake kit or BBK in short. You cannot downsize the rim as the clearance is obviously for 18" and above only judging from the width of the disc. I suggest you keep the setup as it is as BBKs aren't cheap. Enjoy the great braking performance and the great looks too.

Link to post
Share on other sites

Neutral Newbie
  On 4/30/2021 at 6:02 AM, Weewee1976 said:

This is a big brake kit or BBK in short. You cannot downsize the rim as the clearance is obviously for 18" and above only judging from the width of the disc. I suggest you keep the setup as it is as BBKs aren't cheap. Enjoy the great braking performance and the great looks too.

Expand  

Hehe.. Thanks for the advise.. I wanna keep the BBKs but wanna downsize the rims.. So I hv to use this size only.. not even 17"? My fuel on average is 10.8 - 11.5L.. 🤦

Link to post
Share on other sites

Neutral Newbie
  On 4/30/2021 at 6:19 AM, Cwinedine said:

@DinoBoy Go check what is the size of the rotors...visually it looks like 350-355mm rotors, if that's the case, 17" rims won't fit...if it's 330mm rotors then u can downsize to 17"

Expand  

How to check it? It states at the rotors? Thank you..

Link to post
Share on other sites

  On 4/30/2021 at 6:14 AM, DinoBoy said:

Hehe.. Thanks for the advise.. I wanna keep the BBKs but wanna downsize the rims.. So I hv to use this size only.. not even 17"? My fuel on average is 10.8 - 11.5L.. 🤦

Expand  

When I was driving Mazda 5 previously with stock rims and stock tyres, I never got good mileage before also. Haha...

Anyway it's better to find a reputable tyre shop to ask for advise. To measure the disc rotor size, you can just use a measuring tape to measure its diameter. Other than that, rim offset is also important. The correct rim offset will ensure the correct clearance between the BBK and rim, and also flushing nicely with the car's body.

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...