KIA K3 Owners check-in!

[Tianz16]

SX.. bright silver.

 

ohh what freebies did you managed to get from them?

 

Edited June 9, 2016 by Tianz16

[Shiq]

ohh what freebies did you managed to get from them?

Eurostyle, solar film and thinkware dash cam. My SE wanted to give me PPS also but eventually can't cos I did overtrade. Something about the company has to pay extra for overtrade or something so can't give me the PPS.

[flashbang]

The 1.6l cars I drove previously also rpm 2-2500 at 80kmh.. so k3 abt there.. bezel 1300rpm at 80kmh? Seems very low..I would presume bigger capacity cars only rev lower at this rpm/speed bec their engine capacity is bigger.. rpm when revving will be high, depends on your footing.. Mine abt 2.5k before auto trans change gears.. I wouldn't take too much notice of the rpm or fuel consumption, just enjoy the ride...

 

I would think so too, mine is also around there. 1300 sounds quite low for a 1.5L Vezel... anyway FC wise should not be a big difference.

[coolbluepica]

Eurostyle, solar film and thinkware dash cam. My SE wanted to give me PPS also but eventually can't cos I did overtrade. Something about the company has to pay extra for overtrade or something so can't give me the PPS.

Their PPS is not good anyway. Better do it outside.

[Shiq]

Their PPS is not good anyway. Better do it outside.

Yeah that is what I am planning to do. Pay a little more but get a better quality. Thinking of doing ceramic pro 9h.

[zZBarathrum]

anyone can share what is the process like after the bidding is successful ? 

 

Like what the AD will do in terms of the registration of car, sending for inspection then handling over? 

 

once the registration is done that is when your COE starts? and if the AD is slow is handing over its just your lost ? 

 

thanks.

[bronzy]

Yeah that is what I am planning to do. Pay a little more but get a better quality. Thinking of doing ceramic pro 9h.

all these coating, need to go back regularly to touch up? how often would you need to go back to workshop

[Shiq]

all these coating, need to go back regularly to touch up? how often would you need to go back to workshop

 

Am not too sure yet, but I have a habit of not washing my car regularly (for the current one) so I figured doing coating will be good to maintain the paintwork and prevent it from becoming dull looking. Did you do coating for your car?

[coolbluepica]

all these coating, need to go back regularly to touch up? how often would you need to go back to workshop

I did CS-2 and "touch up" is not necessary. Just normal washing will do. Done CS2 for 2 weeks now , so far so good. Excellent hydrophobic and gloss and car does not gets dirty easily. Only washed once in 2 weeks. After rain there's no water marks and dirt.

[lovechinchow]

If have budget, go for ceramic pro 9h. Mine was on it since 2014 and still looks as great as day 1. Many has been giving good comments and has shared on how the product has helped owners. Most importantly, they are not pushy to sell any packages.

 

Just chanced upon a interesting post and share here.

http://www.mycarforum.com/topic/2701949-just-booked-my-car-what-type-of-pps-to-recommend/?p=5832434

[Khaitino]

Guys.. In earlier thread i saw some of u installing rs chip.. May i know any reviews of it?

[teomingern]

If have budget, go for ceramic pro 9h. Mine was on it since 2014 and still looks as great as day 1. Many has been giving good comments and has shared on how the product has helped owners. Most importantly, they are not pushy to sell any packages.

 

Just chanced upon a interesting post and share here.

http://www.mycarforum.com/topic/2701949-just-booked-my-car-what-type-of-pps-to-recommend/?p=5832434

That depends also on how often you wash your car.

anyone can share what is the process like after the bidding is successful ?

 

Like what the AD will do in terms of the registration of car, sending for inspection then handling over?

 

once the registration is done that is when your COE starts? and if the AD is slow is handing over its just your lost ?

 

thanks.

Relax... just wait for your SE, they won't cheat you one lar...

I would think so too, mine is also around there. 1300 sounds quite low for a 1.5L Vezel... anyway FC wise should not be a big difference.

1300 RPM for a 1.5 L non-turbo engine sounds wrong... doesn't have enough torque.

[scizorsim]

Ceremic Pro makeover done today. Photo taken and edited by me. 

[nicktan83]

Ceremic Pro makeover done today. Photo taken and edited by me. 

 

wow..nice! where did you did the PPS and how much?? Thinking of doing it as well when I collect my car.

[Alfredha]

 The PPs looks fantastic on your red car....Congratulations.

[Brianlee]

wow....KIA K3 price was updated.

[scizorsim]

wow..nice! where did you did the PPS and how much?? Thinking of doing it as well when I collect my car.

 

Thanks! I did it with Ace GT, the extreme package heh. Damage was ~$1.5k

[bronzy]

wow....KIA K3 price was updated.

woah 100,999 for 6 bid G with 50k rebate. now no more 2 bid guaranteed? Edited June 14, 2016 by bronzy