Jump to content

Chevrolet Orlando New MPV

Patricklyb

By Patricklyb,
in American Talk

 Share

Recommended Posts

Fake

Fake

Neutral Newbie

You can used my car or fuelio if u using android phone

 

Just got my car a few day and I experience the same jerk or slow speed in 1st gear. I just did my 1st full tank pump using 95. May switch to shell 98 for the next tank and see how it goes. Any one have the same feel with their cars?

 

I also experienced the jerk during low speed when the gears are changing. So far I have been pumping 95 and just went for my 1st 1k servicing. 

 

Let me try pumping 98 the next time..... 

↡ Advertisement
Link to post
Share on other sites
Davidpai04

Davidpai04

1st Gear

I use android app FuelLog. The onscreen one will give me 6.9L/100km while I calculated is 7.4L/km=13.5km/l

 

So far now, the jerk issue is very rare. Only afew times I encounter it. I have been pumping 95 now.

 

Woh.. this is impressive. Mine is 9.4L/100km or 10.6km/l and driving mixed road. Initially reading is 9.9 and then improve to 9.4 lately. I am not heavy footer but I find it is relatively higher. I will use Android Apps to monitor next time I re-fuel.  

 

I pump 95 and do experienced the jerk during start off or after red light while gear changes from low to high. I thought due to turbo kick in as I saw rpm meter move above 200 and then gear change.

 

After installed OBD2 Chip last week, I can feel the gear change smoother (less jerk) but feel more heavy to start off after red light stop. Let see any improvement after 1K service on this weekends. 

 

 

Link to post
Share on other sites
abcedcch

abcedcch

1st Gear

Woh.. this is impressive. Mine is 9.4L/100km or 10.6km/l and driving mixed road. Initially reading is 9.9 and then improve to 9.4 lately. I am not heavy footer but I find it is relatively higher. I will use Android Apps to monitor next time I re-fuel.

 

I pump 95 and do experienced the jerk during start off or after red light while gear changes from low to high. I thought due to turbo kick in as I saw rpm meter move above 200 and then gear change.

 

After installed OBD2 Chip last week, I can feel the gear change smoother (less jerk) but feel more heavy to start off after red light stop. Let see any improvement after 1K service on this weekends.

Maybe I only carry 2 adults and 2 kids during weekends. Most of the time weekdays only alone so FC is on the good side.

 

By the way, what is OBD2 chip? Does it void warranty?

 

I have bought a obd2 adapter and use a android apps to display the info.

 

I connected for 24 hours all day. Did not unplug. Few days later the display pop up a warning light which is Power Sterling Assist. Somehow after unplug, did not return the warning light.

 

Maybe cannot left in car for 24hrs? The adaptor abot hot after sometimes.

Link to post
Share on other sites
Maverick713

Maverick713

1st Gear

Woh.. this is impressive. Mine is 9.4L/100km or 10.6km/l and driving mixed road. Initially reading is 9.9 and then improve to 9.4 lately. I am not heavy footer but I find it is relatively higher. I will use Android Apps to monitor next time I re-fuel.  

 

I pump 95 and do experienced the jerk during start off or after red light while gear changes from low to high. I thought due to turbo kick in as I saw rpm meter move above 200 and then gear change.

 

After installed OBD2 Chip last week, I can feel the gear change smoother (less jerk) but feel more heavy to start off after red light stop. Let see any improvement after 1K service on this weekends. 

 

Don't forget to unplug it before you go for your servicing.

Link to post
Share on other sites
Kuanhui

Kuanhui

1st Gear

Hi,

 

My left side back passenger door's power window fail to work. No light on the switch too.

All other side still working find. :mellow:

 

Does anyone encounter this problem?

 

 

Link to post
Share on other sites
7seater

7seater

Clutched

Hi,

 

My left side back passenger door's power window fail to work. No light on the switch too.

All other side still working find. :mellow:

 

Does anyone encounter this problem?

 

Check you fuse. First locate from fuse box which is the correct fuse for that window. Pull out and check whether it is broken. If the fuse is ok, then please have to refer to AD to open the door to check whether any wiring or terminal drop off or even other faults.

Link to post
Share on other sites
Cheefarn

Cheefarn

5th Gear

Dear,

 

Does anyone know details about Camaro ZL1, for 2018?

 

Thanks in advance.

Camaro ZL1 is a fastest and most powerful variant of the Camaro, and its barely street legal and it has lots of equipment removed to save weight.

 

But why are u asking this in a SG forum? GM doesnt build RHD Camaro and certainly the ZL1 won't be offered outside North America.

Link to post
Share on other sites
Acosean

Acosean

1st Gear

What is most important is to remember the following:

 

Chevrolet Camaro ZL1 - Top Speed 300 km/h (muscle car with sturdy body - very heavy, safe and can seat 5)

Chevrolet Corvette ZR1 - Top Speed 330 km/h (lighter body, can only seat 2)

 

Both are very safe because of having Magnetic Ride Control, Electric Stability Control, etc.

Link to post
Share on other sites
alkapone

alkapone

Neutral Newbie

Camaro ZL1 is a fastest and most powerful variant of the Camaro, and its barely street legal and it has lots of equipment removed to save weight.

 

But why are u asking this in a SG forum? GM doesnt build RHD Camaro and certainly the ZL1 won't be offered outside North America.

 

I saw a lot of articles about this car, in past weeks...also about potential production outside North America..it's very presumably....so, I would like to know others opinions... maybe you know an estimated price?

Link to post
Share on other sites
Davidpai04

Davidpai04

1st Gear

Today I went to Alpine Service again to fix Solar Film at front Wind Screen. There is some air gap at corner and can't go away even after pressing. It would get bigger over time and reported to Technician last week during 1K check. So they arranged Solar Film guy to re-do again today. It is good service and issue fixed now.

 

I also encountered color fainting at black plastic area (just after weeks??) and need to wax it to blacken again. Sometimes I need to park at open car park (rain and shine) but I think it is too quick to see this. Do you guys faced the same?  

Link to post
Share on other sites
Kuanhui

Kuanhui

1st Gear

Today I went to Alpine Service again to fix Solar Film at front Wind Screen. There is some air gap at corner and can't go away even after pressing. It would get bigger over time and reported to Technician last week during 1K check. So they arranged Solar Film guy to re-do again today. It is good service and issue fixed now.

 

I also encountered color fainting at black plastic area (just after weeks??) and need to wax it to blacken again. Sometimes I need to park at open car park (rain and shine) but I think it is too quick to see this. Do you guys faced the same?  

 

Hi,

 

My ride also have some bubbles at the corner, it also cant go away even after pressing.

 

I notice that the horn sound loud in the car and sound came from the left side, is it connected to the speaker as well?

Every morning, I hear "clicking" sound on the right side under-carriage, I got it check recently but service center say nothing wrong and only tighten and lubricate more, does anyone have such problem? :mellow:

Link to post
Share on other sites
TanPengHock

TanPengHock

Clutched

Hi,

 

My ride also have some bubbles at the corner, it also cant go away even after pressing.

 

I notice that the horn sound loud in the car and sound came from the left side, is it connected to the speaker as well?

Every morning, I hear "clicking" sound on the right side under-carriage, I got it check recently but service center say nothing wrong and only tighten and lubricate more, does anyone have such problem? :mellow:

I also have the same issue with the solar film, went for my 1st K service yesterday and got it fix today. No more bubble.

Link to post
Share on other sites
Davidpai04

Davidpai04

1st Gear

Bro, your silver looks really handsome... Like it!

 

Thanks. In fact, I like White Color the most but don't have much time to maintain and wash. Paint coating with Ceramic will cost $1.6K or more as I checked with the shop for Orlando. Silver is the common color that need least maintenance and I settled with this.

 

Thinking of adding side doors protecting strip that I saw some cars did. Any suggestion as I found many types and not sure what is the most effective of protecting. 

13my-mirage-side-moulding-fr.jpg  cr02716.jpg

↡ Advertisement
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...