Sgbikee80 Neutral Newbie January 5, 2011 Share January 5, 2011 (edited) Just to share, found a shop in SG that sell 2 x 2.5m for $10+. quite tempted to get from SG if the GB is not going ahead Edited January 5, 2011 by Sgbikee80 ↡ Advertisement Link to post Share on other sites More sharing options...
Kurty Supercharged January 5, 2011 Share January 5, 2011 i'm keen too, any idea how much is required for one door? estimation Link to post Share on other sites More sharing options...
Sky_vinz Clutched January 5, 2011 Share January 5, 2011 MG_Myvi: I didnt return. 'Cause worksmanship wasnt very pretty in the first place. Quite upset by it. Link to post Share on other sites More sharing options...
MG_Myvi 1st Gear January 5, 2011 Share January 5, 2011 MG_Myvi: I didnt return. 'Cause worksmanship wasnt very pretty in the first place. Quite upset by it. Bro...see my earlier postings and pic....maybe you can consider what I done. Just DIY. If need help with installation...let me know. Link to post Share on other sites More sharing options...
MG_Myvi 1st Gear January 5, 2011 Share January 5, 2011 i'm keen too, any idea how much is required for one door? estimation Depend what car...normally 2.5m for one side should be ok. Link to post Share on other sites More sharing options...
MG_Myvi 1st Gear January 5, 2011 Share January 5, 2011 Just to share, found a shop in SG that sell 2 x 2.5m for $10+. quite tempted to get from SG if the GB is not going ahead Ya...a few rubber dealers are selling them at very cheap price. Just make sure it's EPDM rubber and can withstand heat. And also make sure clean the surface as I have mentioned earlier before installing. Link to post Share on other sites More sharing options...
Kurty Supercharged January 5, 2011 Share January 5, 2011 Depend what car...normally 2.5m for one side should be ok. that's helpful info if 5 door car, need to factor the 5th door? Link to post Share on other sites More sharing options...
Kurty Supercharged January 5, 2011 Share January 5, 2011 Just to share, found a shop in SG that sell 2 x 2.5m for $10+. quite tempted to get from SG if the GB is not going ahead care to share which shop is that? to bro MG_Myvi, you driving a myvi? mind sharing what is the price in autobacs for 10m long? if a little more, i don't mind. it's actually quite disturbing at times.. Link to post Share on other sites More sharing options...
Ml_88 1st Gear January 5, 2011 Share January 5, 2011 I am interested too!! Link to post Share on other sites More sharing options...
Kakabobo Clutched January 5, 2011 Share January 5, 2011 interested in getting as well. please count me in. Link to post Share on other sites More sharing options...
Kurty Supercharged January 6, 2011 Share January 6, 2011 maybe can all mass buy in sg then find bro MG_Myvi and seek his help Link to post Share on other sites More sharing options...
Haziqko Clutched January 6, 2011 Share January 6, 2011 Hey bro, you order yet...??? say i wanna do also for my sunny, can tompang your order...??? And whats the process of payments...??? Link to post Share on other sites More sharing options...
Davidcks 1st Gear January 6, 2011 Share January 6, 2011 I done up mine....but price on the high side as I got the materials from Autobacs. It's from Japan. Maybe you guys can take a look at their website. http://www.amon.co.jp/seihi/seihi_group.php?id=313 I used item no. 2649 and 2652. End result not bad...the rubber qualities are so far the best. Using real 3M tape. I used many types in the past from hardware shops and etc....but it was real hell for me....those cheapo products failed me. Till I gave up and stop believing on cheap rubbers seals. I rather spend more for quality rather then so much hassle of installing and removing...most importantly.. waste my money. I went Autobacs recently to walk around, but cannot this stuffs you mentioned, which outlet you went?? The website shows different strips for different use, which is very interesting. Good stuffs. Link to post Share on other sites More sharing options...
GemLeo 1st Gear January 6, 2011 Share January 6, 2011 zippo lighter fuild is good to clean the surface before sticking... it's oil based.. thus it can remove the dirt from the surface for your adhesive to stick effectively. of cos.. u can use a lint free cloth to clean... even better. Link to post Share on other sites More sharing options...
Stanchiam 1st Gear January 6, 2011 Author Share January 6, 2011 Hey bro, you order yet...??? say i wanna do also for my sunny, can tompang your order...??? And whats the process of payments...??? nope, i have not order yet, waiting for bros here, will be closing this weekend then order. busy making money...lol for those who want to buy, please pm me how many meters u need and will need u to transfer $20 to my account first in case u let me fly kite ;) just telling me u want to join how can i know how many meters u need. as i am also buying lots of other stuff, hope will not go above 400 else need to pay GST. thank u. Link to post Share on other sites More sharing options...
Sgbikee80 Neutral Newbie January 6, 2011 Share January 6, 2011 Just to share, found a shop in SG that sell 2 x 2.5m for $10+. quite tempted to get from SG if the GB is not going ahead care to share which shop is that? it's a hardware shop in Bukit Merah central blk 164. 3-4 shop away from CK shop, just in front of hawker center. Link to post Share on other sites More sharing options...
MG_Myvi 1st Gear January 6, 2011 Share January 6, 2011 Depend what car...normally 2.5m for one side should be ok. that's helpful info if 5 door car, need to factor the 5th door? Ya....up to individual. Some they use all the leftover and joint them for the rear door. (But dun look nice) So best is get 3 to 3.5m more for the rear door. If big SUV...sometimes need around 4m. Link to post Share on other sites More sharing options...
MG_Myvi 1st Gear January 6, 2011 Share January 6, 2011 Just to share, found a shop in SG that sell 2 x 2.5m for $10+. quite tempted to get from SG if the GB is not going ahead care to share which shop is that? to bro MG_Myvi, you driving a myvi? mind sharing what is the price in autobacs for 10m long? if a little more, i don't mind. it's actually quite disturbing at times.. It's a lot more compared to those they mentioned for the group buy. The price is really on the high side..per pack of 4m plus cost around $40+. But to me...I used many before...doesn't turned out to last due to hit...deformed. Ended up wasted more $$ even it was cheap. So far these product I used....really a ↡ Advertisement Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In NowRelated Discussions
Related Discussions
Replace old car doors rubber seal.
Replace old car doors rubber seal.
Cost Door Lock Repair cost how much?
Cost Door Lock Repair cost how much?
Digital Door Lock
Digital Door Lock
Tiongs angered by Strip ad about hairy orang utan
Tiongs angered by Strip ad about hairy orang utan
Hdb main door
Hdb main door
Double sided tape for door visor
Double sided tape for door visor
BTO flat bathroom doors splitting, HDB does nothing
BTO flat bathroom doors splitting, HDB does nothing
LED light strip in headlights
LED light strip in headlights