Jump to content

Proton Exora


Neokn
 Share

Recommended Posts

anybody encountered the fan still turning after engine is switched off? i understand it is to cool down the engine further. but this is the first time my car did it. n also, the day it happened, i noticed that my engine is super hot, hotter than usual.

 

 

My old hyundai excel was like that. Off engine fan can still run. It connect direct to battery.

 

Downside is when yr battery old n weak e running fan wil drain power n later u cant start. [bigcry]

↡ Advertisement
Link to post
Share on other sites

update on my overheating prob. culprit is the radiator fan. it came off from the motor. so i was driving ard with no radiator fan. now fixed back already. lucky wasnt anything serious.

 

Hey bro. Same thing happen to my fan. Posted my thread about it a few months back. Make sure you put a spring washer. So the nut securing the fan don't come off. In m'sia they are recalling exora back to solve it.

Link to post
Share on other sites

Glad to see so many Exoras on the road...

 

Today i brought my Weekend Exora to Office and I saw 4 Exoras on the road...

Let it grow..... [rolleyes]

 

Wishing a Happy New year to all the Chinese friends in this forum....

Link to post
Share on other sites

Hey bro. Same thing happen to my fan. Posted my thread about it a few months back. Make sure you put a spring washer. So the nut securing the fan don't come off. In m'sia they are recalling exora back to solve it.

oh is it...didnt notice ur post. im not sure whether shop got put washer or not.

Link to post
Share on other sites

oh is it...didnt notice ur post. im not sure whether shop got put washer or not.

Stupid TTS didnt even change my fan when I sent in for servicing, even though my car 's chassis number is one of the affected. Lousy, going to bang table after CNY?

Link to post
Share on other sites

Well during the raining season switch on the wiper very noisey,During the 2nd servicing told the SC abt the problem, they did something to the wiper.Still the noisy sound did not go off.any of u'all have the same problem?? :o

 

How to overcome this problem?

 

will changing the wiper blades make any diff??

 

Pls share ur ideas. :D

Had the same problem when I collected my car. Spent $68 at autobacs to do the wiindscreen spa. Thereafter much much better, coupled with a change of wipers to Bosch.

Link to post
Share on other sites

post-12527-1360743474_thumb.jpgHi bros,

 

Do u know where I can get the cover for the 3rd row seat, as shown in the attached picture? If not, I would like to purchase 2 from any Exora owners here. Interested sellers can drop me a pm. Thanks!

Link to post
Share on other sites

Read about the non spraying of anti rust at the spare tyre compartment. Any owners feedback to Singapore SC?

 

Should we write a petition to Sg Proton?The cover you need to go Jb proton at Larkin before the mosque,Most probably the have it.My saga blm front pax seat also missing

Link to post
Share on other sites

Should we write a petition to Sg Proton?The cover you need to go Jb proton at Larkin before the mosque,Most probably the have it.My saga blm front pax seat also missing

 

I am thinking should we write a petition to Mr. Hisham, CEO of Proton instead. We should provide some feedback to the poor service rendered by TTS Service Centre.

 

As for the missing part, can I tag along if any bro is going to Larking Service Centre? Thanks!

Link to post
Share on other sites

Can someone kindly help me to translate the malay words in the picture to english? Believe it was posted by one of the bros here earlier. But as it is in malay, I can't understand. TIA! post-12527-1360813629_thumb.jpg

Link to post
Share on other sites

loose translation... so dun expect much ^_^

 

Problem/Solution

1. cluck sound at front absorber when run over pothole or hump/change bump stopper PW827060 and Upper Protector Insulator PW826668

2. Loose Absorber screw/Ask SC install new screw

3. Aircon not cold, too cold emit foul smell/Change PW950619 Thermo Amp Assy

4. Burnt Fuse box and all Exo chassis no.18,139 below/install grounding cable sub harness front PW897319

5. track-tack noise/ change plunge solenoid rubber PW895223

6. Zing sound at 2-4k rpm/install washer on zinc screw panel above exhaust

7. flooded headlight/change new headlight set at SC

8. steering veering left/make alignment to initial (recommended...? SC always make not nice)

9. Clogged rear wiper spray/press and hold (because water tank from front to back is far, took longer time to reach)

10. cabin light burnt/change new

11. 3rd brake & rear chrome cover loose/ ask SC tighten the screw

12. Driver's door tight/ask SC tighten screw & grease up

13. smell of petrol fume after refueling/ask SC to apply silicon sealant at petrol tank hatch

14. engine head cover peeled/ask SC for repaint

15. water wiper tank cover detached/ask SC change new

16. Engine oil leak/ask SC tighten screw or change oil seal/new gasket

17. no anti-rust paint on undercarriage above spare tire/ask SC for anti-rust respray

18. Seat can fold but can't tumble/ask SC to adjust screw at 2nd row seat

19. eeoock sound at slow or fast (drive below 15kph with all windows open, AC off, radio off)/SC to change 1 set Rear trailing arm

20. sound during decelerating or juddering(?) during traffic jam when braking. also at red light, gear engaged, foot on brake but car still move bit by bit very slowly, clear sound/SC to change new drum brake with larger spring compare to existing

21. burnt smell when accelerate/possible caused by drip of anti-rust on to exhaust

22. driver's window vibrating at 50-60kph, when speed up, howling sound/SC to adjust door panel tighter to chassis

23. rear window heater can't be use/tint window installer's fault. change new

 

hth..

Link to post
Share on other sites

Wow.... thanks a lot for the translations

I also have few of the listed issues... and now, know the cause also....

But the item 21.... not sure whether it is to do only with the anti-rust...... as I'm still getting it when I floor down and my CFE is coming to 10k.....

Link to post
Share on other sites

I am thinking should we write a petition to Mr. Hisham, CEO of Proton instead. We should provide some feedback to the poor service rendered by TTS Service Centre.

 

As for the missing part, can I tag along if any bro is going to Larking Service Centre? Thanks!

 

Service Ctr usually c--k up but at least got warranty

Link to post
Share on other sites

Service Ctr usually c--k up but at least got warranty

 

just experienced a service nightmare from TTS a day ago... now there is anew fella by the name of adrian and no more sam. my exora which is exactly a year old have been having problems with the BCM. having htis problem for almost past 10months, and finally the spare part arrived... that too i had to constantly call in to check. the bcm controls the remote key. after they changed now both the keys not working, totally, not even the red alarm button. just screwed that guy this morning and wasking wat are they doing there ?

↡ Advertisement
Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...