Getz's Owner , workshop to do servicing?

[Hp93868686]

Hi , Getz's owner ... Any workshop near west area where i can do my 80,000km servicing for my 2.5yrs old Getz as AD pricing , a bit on the high side

Edited April 29, 2009 by Hp93868686

[Junjie]

Go to Sebs Auto at Enuos Ave 4..called Dean at 96950814, tell him Bouncer introduce.....very established in korean car....they repair MIK rides before KMC started...

[Hp93868686]

That a bit far , any 1 know any near the west area? Thanks

[Tkseah]

Can try CDGE.. generally ok.. but better to bring your own oil cos i dun quite like their normal options of oil...

 

http://www.cdge.com.sg/contact/location.asp

[Hjteo]

Not Getz but Accent owner here. Have you considered Harmony motors? It's in the west. Check if you can bring your own parts/oil and the labour cost.

 

For 80K, have you changed your timing belt ? You could check this out as well.

 

For me, I go to my regular workshop in Alexander Village (TJ car care) and bring my parts most of the time.

 

 

[Pentrain]

hi all, i have heard quite a few mentioned gary from esso at lavender..

 

any other workshops to recommend in the north or west area?

[Alfredpoon]

That a bit far , any 1 know any near the west area? Thanks

 

U can go to this workshop at Toh Guan East tell them Alfred(yellow Getz introduce):

http://aoto.sg/index.php?option=com_conten...1&Itemid=66

Edited September 24, 2009 by Alfredpoon

[Xxsamxx]

 

hello, I just bought a 2nd hand getz. want to do full servicing and maintenance, n maybe zhng abit the interior and the engine bay. any reliable reccomendations? thanks!

[Servic]

Not Getz but Accent owner here. Have you considered Harmony motors? It's in the west. Check if you can bring your own parts/oil and the labour cost.

 

For 80K, have you changed your timing belt ? You could check this out as well.

 

For me, I go to my regular workshop in Alexander Village (TJ car care) and bring my parts most of the time.

 

 

tats pretty near my place! May i know how much do they charge for labour? ie labour for changing engine oil, ATF, air filter and spark plugs etc

[Ken4555]

Hi , Getz's owner ... Any workshop near west area where i can do my 80,000km servicing for my 2.5yrs old Getz as AD pricing , a bit on the high side

 

Seriously, just servicing, go any shop at Bukit Batok there lah... or Toh Guan area... unless got problem with your ignition timing off or need to do engine diagnostic, no need to go to korean car specialist.

 

Try AUTOSAVER... cheap and service according to manufacturer recomends at very reasonable prices... search on the web for locations. got more than 1 outlet.

[Kayheng]

central any recommendation? i live near novena sq ...

 

also as i buy a 2nd hand opc car.. now milege is 27 K .. wad servicing should i go for? cos i dunno previous owner got go 20 K servicing anot

[Facadegeniality]

Hello, i jus bought a 1.1M getz 2006..my signal light doesnt self-cancel after the turn...any getz driver experienced this?

i sent my car to a workshop in Sin Ming. He says he checked the steering and all that but found no issues..

 

he says LL, most prob is the way it is ( i kinda doubt it ). So now have to cancel the signal myself..

Edited June 4, 2010 by Facadegeniality

[Kb27]

I heard someone had this problem before. Something broke inside the steering wheel which cause the turn signal self-canceller not to work.

 

Just replace it.

[Rickster86]

Aoto is good in service n price. Alot of parts for korean and japan model. They use bizol, KIC and redline oil.

[Rickster86]

Btw an Getz driver here using boss kit and when u drive at speed above 70 on those not so smooth road, u hear abit of rattling sound coming from area around the steering area?

[Cynidejunkie]

Gary's at lavender or Aoto are both good. depends on where you stay

 

prices are pretty similar too.

 

if you want redline oil servicing package Aoto is the place to go. reasonable prices

[Facadegeniality]

I heard someone had this problem before. Something broke inside the steering wheel which cause the turn signal self-canceller not to work.

 

Just replace it.

 

oic...what is the thing that broke?

[Kb27]

oic...what is the thing that broke?

 

Not sure. Probably some kind of plastic.

 

Get a mech to open up the steering wheel and check which part should be cancelling the turn signal. That is the part that is not working.