Roller Blinds

[Mahjong74]

If I didn't needed the 100% cannot fail motor, I would have bought from taobao, ownself install

But the level of care and skill that gets into the installation for me was insane

Mine is a 6m tall x 4 wide

It cost me 500 to get a scalfolding in, so I needed the motor to be 100%

They took 30 mins to erect the scalfolding

3 hours to install

4 hours to do calibration

That Malay supervisor is really a perfectionist! Solid guy!

I can't see where it was not straight

That fellow could see

Keep getting his 2 guys to do again, again and again

Really solid guy!

 

They use the motor call somfy I think

 

Yes the malay supervisor is damn good and responsible.

 

He also get his guys to redo for my room again because of a little bit out of alignment. And I can't see with my naked eyes.

 

The motor I think got a few types, same as their roller blindes. Commercial and normal grade.

 

Go for the commercial grade if you willing to pay a bit more

[Stepspro]

 

Tks bro, but what I want is to buy locally leh.....and ask contractor to do installation.

 

Try google Neowin Singapore.

 

their product is good. Much better than ikea.

[Luckcent]

Try google Neowin Singapore.

 

their product is good. Much better than ikea.

 

Thank you.

[Mustank]

 

Yes the malay supervisor is damn good and responsible.

 

He also get his guys to redo for my room again because of a little bit out of alignment. And I can't see with my naked eyes.

 

The motor I think got a few types, same as their roller blindes. Commercial and normal grade.

 

Go for the commercial grade if you willing to pay a bit more

I think my one should commercial one because getting the scalfolding in will cost me $500

Makes sense to get a solid one

the somfy remote control very jiak dian. 1 month need to change once if used daily. and the battery also expensive and hard to find.

I used 5 months already, ok leh

The battery is $5 per piece

Crazy man for one button batt

[Kxbc]

I think my one should commercial one because getting the scalfolding in will cost me $500

Makes sense to get a solid one

 

I used 5 months already, ok leh

The battery is $5 per piece

Crazy man for one button batt

I found one store selling that batt for $3.50 per piece. So I bought 5 spares like 6 months ago.

 

$#%@@#$! that day my batt ran out so I took out the 5 spare batt. All got no power except one!!! waste my money. It's a Jap brand. M-something. Can lithium batt run out of juice while in storage?

 

next time I will stick with the Sony brand.

 

Actually that batt model quite hard to find one.

[Jpquek]

Sorry to bring up this old thread. Any good recommendation of roller blinds where I can purchase w/o installation, besides Ikea pls. TIA

Hi bro,

 

Do visit my website at http://ozone-wide.com/

 

We can custom made your roller blind and you can self collect and install yourself.

 

You can be assured of the workmanship and the quality of the blinds.

 

Kelvin (91149596)

[Adrianli]

I found one store selling that batt for $3.50 per piece. So I bought 5 spares like 6 months ago.

 

$#%@@#$! that day my batt ran out so I took out the 5 spare batt. All got no power except one!!! waste my money. It's a Jap brand. M-something. Can lithium batt run out of juice while in storage?

 

next time I will stick with the Sony brand.

 

Actually that batt model quite hard to find one.

 

If it was me, I would have DIY w/ my own rechargeable battery.

 

 

Something like this : http://www.mycarforum.com/topic/2696892-finevu-cr300hdcr500hd-battery-replacement/

[Jpquek]

I think my one should commercial one because getting the scalfolding in will cost me $500

Makes sense to get a solid one

 

I used 5 months already, ok leh

The battery is $5 per piece

Crazy man for one button batt

The motor u using there no differentiation between commercial or residential . Basically for tubular motor, the only difference is whether is a mechanical limit switch motor or a built in receiver motor, where the setting of the limit is done by remote control or using a key to tune the upper or lower limit. The battery life span depend on the usage unless you got yourself a lemon.

[Jpquek]

If I didn't needed the 100% cannot fail motor, I would have bought from taobao, ownself install

But the level of care and skill that gets into the installation for me was insane

Mine is a 6m tall x 4 wide

It cost me 500 to get a scalfolding in, so I needed the motor to be 100%

They took 30 mins to erect the scalfolding

3 hours to install

4 hours to do calibration

That Malay supervisor is really a perfectionist! Solid guy!

I can't see where it was not straight

That fellow could see

Keep getting his 2 guys to do again, again and again

Really solid guy!

 

They use the motor call somfy I think

Bro, there no fail safe motor unless the motor u using are those that come with handcrank where u can still turn the motor when power failure.

[Sabian]

I'm curious.

 

Roller blinds need motor bec of convenience?

 

Or bec manual ones always pichar?

[Jman888]

I'm curious.

 

Roller blinds need motor bec of convenience?

 

Or bec manual ones always pichar?

 

 

manual also got better one, motor more atas feel, if can operate by clapping hand even better

[Mustank]

I'm curious.

 

Roller blinds need motor bec of convenience?

 

Or bec manual ones always pichar?

If the height is less than 3m, manual one can already

If more than that need motor if not old folks like my mum to problem moving it

 

 

manual also got better one, motor more atas feel, if can operate by clapping hand even better

Seekali piaking piaking, the motor thot is clapping clapping

Then goes up and down, up and down

[Adrianli]

 

 

manual also got better one, motor more atas feel, if can operate by clapping hand even better

 

Shout password one better. "Open Sesame"

[Jman888]

 

Shout password one better. "Open Sesame"

 

 

cannot, many already having problem commanding Siri cos we have different accent and way of speaking

[Jpquek]

I'm curious.

 

Roller blinds need motor bec of convenience?

 

Or bec manual ones always pichar?

motorized blinds is due to convenience......press a button and you can juz ignore it and do your own stuffs. Some with home automation, you can preset the timer or using sensor to operate but all this come with a much higher cost.

[Kxbc]

bro mustank, is yours roller blind or wooden blind?

 

if it is roller blind, motorised it quite overkill lah.

 

but if it is wooden blind, sure need it to be motorised as anything above 2+m height is super heavy to pull.

[Angcheek]

Anyone made this kind of blind before ??? 2 tone with blackout option ...

 

usually 2 type of origin : Korea and China.

 

Any price info to share ? Thanks

 

 

[A_korusawa]

Anyone made this kind of blind before ??? 2 tone with blackout option ...

 

usually 2 type of origin : Korea and China.

 

Any price info to share ? Thanks

 

 

 

i just got this on my roof top room.... materials came from korea....

but its only meant for indoors and the length is limited to 2.5m coz its weight (double layers)......

I have z-wave installed with the power, thus I can up & down with wifi, and using remote for the flip-up 2 tone as well.

 

btw, I also have all my house's roller blinds installed with z-wave to the power/remote source so that you can also manage them with wifi besides remote provided.... cheers!