Volt and temp gauge

[Contax]

I want to install the above 2 gauges , any places to recommend.

No need branded stuffs , as long as it work perfectly .

[Jazz]

Try Mcwell Venture.

[Starsaaa]

U can try poh lay asessories at this Pasir Panjang rd opp the Pasir Panjang Food Centre.

 

My friend went to MY and compare pricing,the pricing at poh lay will be more attractive.

[Contax]

thanks.

[Contax]

thank you , will drop by and check it out !

[Slayer]

the vold meter is to measure the battery voltage ? or the alternator ? just asking coz i am not so sure how it works. or they are the same whether measuring battery or the other points ?

[Kenzomaz]

How much?

[Nine_eleven]

  Quote

I want to install the above 2 gauges , any places to recommend.

No need branded stuffs , as long as it work perfectly .

 

if you're reffering to water temperature and volt meter, just buy a ScanGauge2.

 

it will show you these two readings from your OBD2 port in your car. will not cost more than $250.

 

installing is just a matter of plugging the connector into the OBD port near your driver's foot well area.

 

what car you driving?

[Jazz]

Not all cars suitable to use scangauge right ?

[Starsaaa]

Not sure for the 2 gauges..

 

But for 3 gauges is abt $280 at last year (jan to june; not sure when as I forget when i installed it)pricing.

 

Gauges are as follows Vaccum, Voltage and Water. Price include all in with installation plus the adaptor.

 

For now the pricing went up a bit, as heard from my friend who had just installed.

[Starsaaa]

The scangauge price will be more attractive as it has more functions.

 

For the gauges will be more for cosmetic purposes. That will depend on the buyers' decision.

 

Yes not all are suitable to use scangauge.

[Starsaaa]

The volt meter will be used to measure the car batt.

[Nine_eleven]

most cars can use scan gauge, that's why i asked about TS's car model.

 

to me, it's the best gauge money can buy...

[Jazz]

$280 only ? Good price you got there !!

[Jazz]

How or where to check, I driving a Latio, so not sure whether is it compatible ?

[Nine_eleven]

Latio can lah, no problem with compatibility.

 

cars older than 1994, or certain JDM might have a problem...

[Iygnaug]

Is there any single din gauge available in the market?

 

I had looked at the Delfi single din before, but apparently we cannot customise the gauges that we want. So that's out.

 

same thing, i want volt, vacuum, temp..

[Mok_]

Latio is not OBD-II compliant and will not work with ScanGauge II.