DRILL convert to BLOWER ?

[Str2]

Hi All,

I hv a hand held Bosch drill, is there DIY/Hardware shop that sell a device or attachment that helps convert to act as a blower?

[Mercuri]

I dont think so.... what you using it for?

 

hairdryer can or not?

[Fcw75]

Maybe buy a plastic fan blade from Giant and convert?

[Slowmo]

not enough bhp to blow leaves. become fan maybe.

[Adawang]

Not economically viable

fix the drill to a turbo

can blow or suck

but turbo is expensive

 

 

 

 

Y not use a hair dryer

Edited April 10, 2008 by Adawang

[Str2]

My purpose is to blow the my room's air con fins and also the water drainage.

Something like compressed air.

Well,its back to the vacuum cleaner..... thanks all.

[Adawang]

oic

compressed air will not clean the fins

aircon guys use an strong alkaline chemical to clean and flush with water.

 

flush with water if you are able to drain & collect the water at the bottom

of the fins to reduce water spill

Edited April 10, 2008 by Adawang

[Apollo]

tat's not the rite way to do things.

 

i recommend proper cleaning liquid which is alkaline based. similar to household bleach. this goes beri well into the fins smooths out the inside.

 

how to apply? off the aircon. pour it into a spray canister like those use for ironing clothes. make sure u dun mess up the surrounding by placing news paper around the aircon. in fact a blower may do just mess up by throwing dirt everywhere.

 

keep spraying to make sure the liquid gets into all fins and wet them, no physical brushing needed.

[Ultramega]

Drill become blow.... sounds like a sex change leh

[Defelio]

[Kklee]

For the aircon fins, perhaps you can try those <$100 steam cleaner/sprayer.