Jump to content

A Swede 93


Coltagious
 Share

Recommended Posts

Just detailed this Saab 93 last week. Came with plenty of scratches, watermarks and the surface was coated with a thick layer of dirt which dirtied my claybar so much I had to throw it away [:/] Oh well, part n parcel of the job [laugh]

 

Process as per follows:

 

1) Wash n claybar

2) Rotary with Foam wool pad with IP

3) DA with orange pad and mixture of IP and PO106FF

4) Rinse

5) Pinnacle paintwork cleansing lotion by hand

6) 2 layers of Ultima Paint Guard Plus by hand with 45mins interval

 

 

Check out the defects:

 

Scratches on the Rear Pillar:

Rearpillar.jpg

 

Scratches on the Bonnet:

bonnet02.jpg

 

bonnet01.jpg

 

Before:

Bonnetbef.jpg

 

After:

bonnetafter.jpg

 

Before and after:

beforenafter.jpg

 

Other areas:

 

Before:

Scratchesbef.jpg

After:

scratchesaft.jpg

 

 

Before:

scratches02bef.jpg

After:

scratches02aft.jpg

↡ Advertisement
Link to post
Share on other sites

A big thanks to all your compliments. [thumbsup] It was a lot of sweat, but glad you guys like it. [laugh] I personally love the way things turn out with this black saab. The photos were taken about 1 hour after the 2nd coat of Ultima PGP and it apparently cures much faster in our climate compared to the US.

Link to post
Share on other sites

Swee.

Looks like the Black is much much deeper

and shines out more then mine.

 

Really miss the Detailing you have done

for me.

Can I ask when should be my next visit

to you again?

Link to post
Share on other sites

Hi bro,

 

Sori i missed your posting. This Saab's black looks "deeper" than your black due to the higher content of metallic flakes in your ride's paint. Thus your ride looks more "greyish" compared to this Saab's which is nearer to solid black.

 

From what I saw of your ride, I believe you only need to look for me somewhere in april or may cos I believe you would have been able to keep your ride in great condition. Let me know around march if you like to make an appt. Thanks

Link to post
Share on other sites

Bro,

 

Once again.. no horse run.. [thumbsup]

 

Care to share how long is the whole process for this 93?

Beside exterior, any interior detailing done?

Link to post
Share on other sites

Hi bro,

 

thanks for your compliments. [laugh]

 

The whole process took me and a partner almost 7 hrs inc interior. I took care of the parts which required rotary while my partner used the PC to finish up. Interior inc vacuum, dressing for all the vinyl, rubber trimmings and leather.

Link to post
Share on other sites

Got to bro, one person do very xiong, esp if the condition is no good and require more time on specific areas, my partner can help to take care of other portions [thumbsup]

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...