Ivan96935sg Neutral Newbie August 11, 2007 Share August 11, 2007 I just realized that a set of NGK Iridium spark plugs which I have bought previously had a gapping of 1.1mm. However, according to my ride's manual, the spark plugs which requires had a gapping of only 0.9mm. The question is:- Q1. Can anyone enlighten me about whether Iridium plugs are able to re-gap? Q2. Is the process of re-gapping difficult?or every mechanic should know how to do it? Q3. Is it advisable to continue using spark plugs with a larger gapping, for instance 1.1mm, as compared to the specs of 0.9mm? Any side issues? ↡ Advertisement Link to post Share on other sites More sharing options...
Blurred Clutched August 11, 2007 Share August 11, 2007 1. Iridium plugs are able to re-gap..just need the correct tools.. I.E Filler Gauge 2. Its pretty simple actually All mechanics shld know how to do it. 3. Not ideal, cos the spark plugs will not perform at its optimum lvl, and might mis-fire causing incomplete cobmustion. Link to post Share on other sites More sharing options...
Karbonphyber 1st Gear August 17, 2007 Share August 17, 2007 heya, all spark plugs are regappable, it's nothing special. even you can do it yourself as long as you have the energy to lift up a spoon to eat. regapping is nothing more than RE-Gapping, adjusting the gap to suit the conditions of the vehicle as for question 3, it is imperative that you choose a spark plug that suits your car. choosing a larger gapping won't result in a mis-fire...... tsk tsk, choosing a plug that's the wrong heat range will.... well, just to explain abit further, how far you 'gap' the plug will determine how far the spark/arc will have to jump. if you're an engineer or do welding, you'll know that the closer it is, the 'stronger' the arc. the further it is, it may not even jump there if the voltage can't arc it. so now you have an idea of what gapping is. if you check my website, i have a DIY on modifying your spark plugs. =) www.tunedfordrift.com cheers Link to post Share on other sites More sharing options...
Infernose Neutral Newbie August 27, 2007 Share August 27, 2007 sparkplug gapping relies on said sparkplug's specs or the car specs for regapping? i always though different sparkplugs should be gapped differently? Link to post Share on other sites More sharing options...
Yeobh 4th Gear August 29, 2007 Share August 29, 2007 The gap size depends very much on the spark plug heat range and the High tension coil or ignitor kV output. With after market high KV ouput coil or ignitor it is best to increase the spark plug gap as much as 20%. Without the wider gap size the high KV will not be able to generate more powerful sparks. Link to post Share on other sites More sharing options...
Elfenstar 3rd Gear September 2, 2007 Share September 2, 2007 not exactly bro Plats should not be regapped. The become fairly brittle with use. Iridiums can be, but be more careful coz their electrodes are a lot more susceptible to damage than copper (that is why most manufacturers recommend not to re-gap them). Link to post Share on other sites More sharing options...
Trex101 3rd Gear September 2, 2007 Share September 2, 2007 Any plugs can be re-gap, there's proper and safe way of doing it. See picture below, note: do not in anyway touch the center electrode. Link to post Share on other sites More sharing options...
Karbonphyber 1st Gear September 2, 2007 Share September 2, 2007 fair enough bro! safety first! btw, do you know where to get NGK R's in singapore? Link to post Share on other sites More sharing options...
Elfenstar 3rd Gear September 2, 2007 Share September 2, 2007 (edited) Nope. Do not regap platinum plugs, not unless you would like the chance of the plat plating on the ground electrode breaking off in the engine. As for the iridiums, you need a needle type gapping tool as the slide type will damage the centre electrode, thats why i said extra care is needed. Edit: I almost forgot. Iridium plugs with platinum coated ground electrodes should not be re-gapped for the same reason. Edited September 2, 2007 by Elfenstar Link to post Share on other sites More sharing options...
Elfenstar 3rd Gear September 2, 2007 Share September 2, 2007 Try trex101 Look at the post before your last one. ↡ Advertisement Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In NowRelated Discussions
Related Discussions
Changing of Spark Plugs
Changing of Spark Plugs
Tool to change Spark Plug
Tool to change Spark Plug
Spark Car Care
Spark Car Care
Aftermarket vs. OEM Spark Plug Wires
Aftermarket vs. OEM Spark Plug Wires
Replace spark plugs
Replace spark plugs
Denso Iridium Spark Plug (IK20)
Denso Iridium Spark Plug (IK20)
Mazda 5 2008 Spark Plug
Mazda 5 2008 Spark Plug
Lotus Spark Plug
Lotus Spark Plug