Jump to content

SARD Fuel Regulator


Sparcoray
 Share

Recommended Posts

wave.gifhi to all MCF bros...

 

Anyone have installed SARD FR in their ride? How's the response after the installation?

Any place to recommend for this device installation?

 

drivingcar.gif

↡ Advertisement
Link to post
Share on other sites

Hi, not sure if u know what's a FR gonna do ... your ECU is normally programmed with a specific fuel pressure in mind, so by changing to another fuel pressure setting, the ECU should be modified to take *that* into account, else u may run rich.

 

Then again, the need for that is when the car is starved of fuel at WOT high rpm, so increasing fuel pressure or changing to larger fuel injector (give larger increase) helps.

 

Actually changing FR is quite simple, think most shop can do it. But I do know one shop who has installed sard before, let me know once u r sure it is applicable for your setup. [thumbsup]

Link to post
Share on other sites

Neutral Newbie

On this topic of SARD FPR, any bros out there knows/got the setup? I've been to 2 workshops and both are telling me different things. I need to know which hose goes to which nozzle. Thanks in advance.

Link to post
Share on other sites

wave.gifhi! I yet to bought but asking bros here got any lobang to get it cheap.

 

I know tat in SG, only two plcs sell this FR and they're ST-Power & GRdrivingcar.gif

 

This product is from Japan

Link to post
Share on other sites

wave.gifWell, i do know abt the setup for my ride but still wan a professional to do it for me at a more neater way.

Trustworthly workshop like GR but service is exp.

Link to post
Share on other sites

No lah, not pro lah, its just that too many places try and push it as a performance mod, but it's only that when your injectors CMI. If you're injectors are coping fine, it just sits there looking pretty and works the same way as a standard FPR.

Link to post
Share on other sites

What is the improvement on the performance % N also the FC

 

01. I have my Air Injet And Fuel Mag and the improvement 25% - 30% in Power n FC and is cheap to install

Link to post
Share on other sites

Thanks, I don't think i need that. My OPTRA 1.6A already have fitted with Air Injet & Butterfly Fuel Mag, also my brake system no longer having tht spongy feeling. Thinking of

- CYCLONE II,

- Shielded cable (ground cable)

- Spark Plug Cable

- Titanium Spark Plug

- Volt Stab

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...